IPV6 support

CLARiiON CX4 series systems can be monitored and managed from an IPv6 client and is IPv6 ready. CLARiiON CX4 series supports dual stack IPv4/IPv6 mode for interoperability with older systems. You can configure the management ports to run IPv4 or IPv6 using NaviSphere Manager.

Thanks Avishek for the reply.
Does EMC CX3-20 array support IPV6. i.e can i configure the controllers with an IPV6 IP

Thanks & Regards
Ranjit

It is only on CX4 at this time.

-Ryan