Unsolved
This post is more than 5 years old
1 Message
0
339
May 20th, 2008 14:00
Managing AX150 via CLI.
Anyone know how I can manage my AX150 through the CLI?
I've seen several documents hinting at this, but none give a definite answer. Most of them point to tools that can not be found (Navisphere Manager, naviAgent/CLI, etc).
If anyone can let me know what I need to do to accomplish this, I would greatly appreciate it.
Thank you.
I've seen several documents hinting at this, but none give a definite answer. Most of them point to tools that can not be found (Navisphere Manager, naviAgent/CLI, etc).
If anyone can let me know what I need to do to accomplish this, I would greatly appreciate it.
Thank you.
0 events found
No Events found!
kelleg
6 Operator
•
4.5K Posts
0
May 22nd, 2008 14:00
If you upgrade to the regular Navisphere (replacing Express) you get more commands, but lose the easy use of Express.
To see which CLI commands are supported, look in the Navisphere CLI Manual in chapter 3 - AX commands will be listed in the Index of the commands
Home > Support > Technical Documentation and Advisories > Software ~ J-O ~ Documentation > Navisphere Management Suite > Maintenance/Administration
"Navisphere Command Line Interface (CLI) Reference 6.26.5 A07"
regards,
glen kelley