This post is more than 5 years old
5 Posts
1
987
January 25th, 2010 04:00
MirrorView between AX4 and CX4
Hello!
Does anybody can advise the next: does MirrorView operate between AX4 and CX4 if they are in the same site and are connected to the same SAN infrastructure?
Thanks!
No Events found!
kelleg
6 Operator
•
4.5K Posts
0
January 26th, 2010 14:00
Just an FYI - links for some reason do not work when you're using Firefox.
glen
kelleg
6 Operator
•
4.5K Posts
1
January 25th, 2010 09:00
Supported storage systems for Fibre channel mirroring configurations
CX4-120, CX4-240, CX4-480, CX4-960, CX3-10c, CX3-20, CX3-20c, CX3-20f, CX3-40, CX3-40c, CX3-40f, CX3-80,,
AX4-5, and AX4-5F8.
Important - A CX4 series storage system can be in a Fibre Channel mirror configuration with a CX3 series only if
the CX3 series is running FLARE 03.24.xxx.5.yy or later. An AX4-5 can be in a Fibre Channel mirror configuration
only if the AX4-5 is running FLARE 02.23.050.5.5xx and Navisphere Manager and the expansion pack enabler is
installed.
glen
Rexus1
5 Posts
0
January 26th, 2010 01:00
Thank you for your answer, glen!
So, these arrays (AX4-5F and CX4-120C) can be in the Fiber Channel mirror configuration. Am I right?
And one more: could you be so kind to give me a link to the document with this information.
Thanks!
Kumar_A
2 Intern
•
727 Posts
1
January 26th, 2010 07:00
kelleg
6 Operator
•
4.5K Posts
1
January 26th, 2010 13:00
Yes, AX4 and CX4 can mirror.
http://powerlink.emc.com/km/live1/en_US/Offering_Technical/White_Paper/H2417_clariion_mirrorview_asynch_dr_wp_ldv.pdf
glen
Rexus1
5 Posts
0
January 27th, 2010 01:00