Unsolved
This post is more than 5 years old
5 Posts
0
783
April 4th, 2008 03:00
PowerPath don't create new Pseudo
There is CX3-40, server PrimePower 900, OS SUN 5.10
Product: PowerPath
Capabilities: All
Problem: PowerPath saw no more five luns.
Navisphere manager adds new lun in Storage Group.
PrimePower saw presented disks,but powerpath don't create new Pseudo name.
Complied with the following commands: devfsadm -v, powermt config, powercf -q
Messages to the log file is not received.
Sergey
Product: PowerPath
Capabilities: All
Problem: PowerPath saw no more five luns.
Navisphere manager adds new lun in Storage Group.
PrimePower saw presented disks,but powerpath don't create new Pseudo name.
Complied with the following commands: devfsadm -v, powermt config, powercf -q
Messages to the log file is not received.
Sergey
0 events found
No Events found!
doof1
45 Posts
0
April 4th, 2008 03:00
devfsadm command is for sd driver
do you try cfgadm -alv and powercf -q?
sarpydog
2 Intern
•
360 Posts
0
April 4th, 2008 04:00
Regards,
Dennis
mulder2
5 Posts
0
April 4th, 2008 04:00
mulder2
5 Posts
0
April 6th, 2008 22:00
sarpydog
2 Intern
•
360 Posts
0
April 7th, 2008 08:00
Please update it, thanks
Dennis
mulder2
5 Posts
0
April 8th, 2008 23:00
PowerPath set 5 Pseudos. He could not set the Pseudo sixth.
------------------------
I have two EMCs (CX3-40 and CX3-20) and two servers ( PrimePower ). This pairs located in different places. They connected on optics.
This problem occured on both EMCs.
If I assign new LUN from another EMC (CX3-20), it works well. New Pseudo created.
sarpydog
2 Intern
•
360 Posts
0
April 9th, 2008 01:00
Please edit the file sd.conf to add more entry.
Regars,
dennis
mulder2
5 Posts
0
April 11th, 2008 03:00
name="sd" class="scsi"
target=13 lun=0;