Unsolved
This post is more than 5 years old
2 Intern
•
137 Posts
0
1932
June 29th, 2011 08:00
Problems with MirrorView Sync
I have two EMC Clariion SANs, a CX3-40c and a CX4-960, Remote Mirrors need to make a 500GB metaLUN found in the SAN EMC CX4-960 Clarrion another Metaluna the same size as found in the other SAN. Both teams are installed in different locations.
The problem is that I'm wanting to create and sync I generated the following message:
Failed Attempting to synchronize the Following secondary mirror images:
The secondary mirror image on storage system in remote CX3-SanCristobal DWH1Mirror mirror: Unable to send a message to the secondary or peer SP. Check to see if theMirrorView primary and secondary connections arrays entre Have Been established.(0x71528003)
Tell me I could support that may be happening
thanks
0 events found
avs
1 Rookie
•
91 Posts
0
June 29th, 2011 12:00
Hello
Do you enable mirror relations between clarion boxes in "Manage MirrorView Connection" form?
In CLI you can do it by running
naviseccli -h IP_SP[A-B] mirror -enablepath SP-hostname [-connectiontype fibre|iscsi]
Alex
kelleg
6 Operator
•
4.5K Posts
0
June 30th, 2011 09:00
Is MirrorView enabled on both arrays? Check in the Array Properties/Software tab and there should be an entry for Mirrorview/S or Mirrorview/A. Both arrays will need to have the same mirrorview enabled.
Next, make sure that both arrays are in the same domain.
glen