On Powerlink go to the following location, the documents you are looking for are titled Navisphere Command Line Interface (CLI) Reference and are specific for each version of FLARE.
Support > Technical Documentation and Advisories > Software ~ J-O ~ Documentation > Navisphere Management Suite > General Reference
Great. In fact you will find all documentation on Powerlink and also the software if you are registered for the same. So no worries for not having the CDs and manuals.
Also, appreciate your prompt action in marking this thread as answered and rewarding points.
Aran very correctly pointed you on Powerlink. You might have also received the Software Media and Documentation CDs and Manuals along with the hardware - the NAVI CLI documentation should be a part of the same as well.
yeah I don't think I have ever used the CDs, they are usually a rev or two behind what is current. I think I have about 100 PowerPath CDs and never used one of them .
Target practice Use a shotgun and you only get 1 shot per cd Use a 30.06 and you can get several shots out of a cd. (That center hole makes a great bulls-eye)
I agree, the software in the CDs relates to the latest revision available when they were packed which may be bit older when you get it.
However, the documentations do not get changed much unless there is a newer family of the code. And also, in this case, raggmopp was trying to find something to start with - thus I mentioned the CDs
By the way, it's really good to see that, I have at least started the conversation of how you can utilize these CDs ... any more ideas??
AranH1
2.2K Posts
0
March 11th, 2008 13:00
Support > Technical Documentation and Advisories > Software ~ J-O ~ Documentation > Navisphere Management Suite > General Reference
nandas
4 Operator
•
1.5K Posts
0
March 11th, 2008 14:00
Also, appreciate your prompt action in marking this thread as answered and rewarding points.
Cheers...
Sandip
raggmopp1
10 Posts
0
March 11th, 2008 14:00
Found on the powerlink as directed.
The books, CDs, etc. I do not have as the previous admin took them with him.
nandas
4 Operator
•
1.5K Posts
1
March 11th, 2008 14:00
Thanks,
Sandip
AranH1
2.2K Posts
0
March 11th, 2008 15:00
dynamox
9 Legend
•
20.4K Posts
0
March 11th, 2008 15:00
dynamox
9 Legend
•
20.4K Posts
0
March 11th, 2008 20:00
RRR
4 Operator
•
5.7K Posts
0
March 12th, 2008 06:00
RRR
4 Operator
•
5.7K Posts
1
March 12th, 2008 07:00
dynamox
9 Legend
•
20.4K Posts
0
March 12th, 2008 07:00
http://crafts.kaboose.com/cd-clock.html
raggmopp1
10 Posts
0
March 12th, 2008 07:00
Use a shotgun and you only get 1 shot per cd
Use a 30.06 and you can get several shots out of a cd.
(That center hole makes a great bulls-eye)
AranH1
2.2K Posts
0
March 12th, 2008 09:00
nandas
4 Operator
•
1.5K Posts
0
March 12th, 2008 10:00
However, the documentations do not get changed much unless there is a newer family of the code. And also, in this case, raggmopp was trying to find something to start with - thus I mentioned the CDs
By the way, it's really good to see that, I have at least started the conversation of how you can utilize these CDs
Cheers,
Sandip
RRR
4 Operator
•
5.7K Posts
0
March 12th, 2008 11:00