UNSOLVED
A
amediratta
2 Intern
•
2014 Posts
0
806
December 30th, 2009 12:00
Reusing disks
I need to remove four 300 GB FC disks from CX3-20c and use them on a CX3-10c. These disks are not in any RAID Group and are unbound.
I have physically removed these disks form the DAE and the DAE is now left with only 1 disk.
Now I am seeing the following errors in SP collects:
Severity Component Category Issue Action
Critical HealthCheck HealthCheck failed. Analyze healthcheck report.
Warning Backend Hardware Faults/FCO Backend issues detected. Contact your service provider.
Warning Backend 0 Hardware Faults/FCO 8 disk reported Invalid Transmission errors. Contact your service provider.
Warning Backend 0 Hardware Faults/FCO 27 disks received LIP F8 (loop failure). Contact your service provider.
Over last one hour the errors have changed to:
Severity Component Category Issue Action
Critical HealthCheck HealthCheck failed. Analyze healthcheck report.
Warning Backend Hardware Faults/FCO Backend issues detected. Contact your service provider.
Warning Backend 0 Hardware Faults/FCO 8 disk reported Invalid Transmission errors. Contact your service provider.
Warning Backend 0 Hardware Faults/FCO 46 disks received LIP F8 (loop failure). Contact your service provider.
Also, the Navisphere Manager shows "E" against the DAE.
Are these Warnings critical? What could be the cause and How can I get rid of them? Would reinserting the disks help me?
I have not changed anything on the cabling side.
Please suggest.
