‎CTE with VNXe2 ??? | DELL Technologies

Start a Conversation

UNSOLVED

emarzock1

updated

12 years ago

emarzock1

124 Posts

0

1128

July 31st, 2014 12:00

CTE with VNXe2 ???

I see in the most recent CTE/VE compatibility guide that VNXe1 is not supported, and VNX/Celerra is. But I see no mention of VNXe2 (VNXe 3200).

Is the 3200 supported?

Thanks,

Eric

R
Rainer_EMC
6 Operator
•
8645 Posts
663
0
Posted August 1st, 2014 02:00
same as VNXe - supported as a target but not as a source

source would need FileMover API which isnt supported on the 3200 yet
J
JosephPGTS
12 Posts
663
0
Posted August 1st, 2014 10:00
Hello Eric,

CTA 10.0 SP1.1 supports VNXe1 as an archive destination and as a file system migration destination for the sources listed in the CTA Interop Matrix.

The VNXe1 and VNXe2 series are not supported as source file servers for archiving because they do not support the DHSM (File Mover API) to allow file stubbing.

VNXe2 has not been qualified with CTA at this time. It is using VNXe OE 3.0 which has not been qualified with the current version of CTA. If VNXe2 support is needed prior to qualification an RPQ would be required.

Regards,

Joseph P