This post is more than 5 years old
2 Intern
•
232 Posts
0
16231
Brocade logs
Hello,
How can I get a Brocade B200 switch logs ?
Thanks/Regards
Consty
This post is more than 5 years old
2 Intern
•
232 Posts
0
16231
Hello,
How can I get a Brocade B200 switch logs ?
Thanks/Regards
Consty
Top
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
April 16th, 2010 10:00
supportSave will capture supportShow along with other logs and upload it to an ftp/tftp server.
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
April 16th, 2010 10:00
take a look at supportSave command
Consty
2 Intern
2 Intern
•
232 Posts
0
April 16th, 2010 10:00
Thanks
I also heard about SupportShow.
Regards
AbhishekKS
71 Posts
0
June 29th, 2010 23:00
Hi Consty,
To collect logs in Brocade switches you will have to login to the CLI and give the command:-
supportsave
this will ask for a ftp server location, this is where it will save the log file in zipped format. This will take some time depending upon the size of logs (15 minutes - 45 minutes).
The 'supportsave', command is a superset of supportshow, as the later is contained in the former. If you are not able to collect 'supportsave', for some reason then you may try 'supportshow'.