Start a Conversation

Unsolved

B

10 Posts

771

February 13th, 2023 21:00

DS-300B ISL SFP

Hi! Everyone

We use DS-300B * 2EA, which are tied together by ISL.

Simple information Firmware Version : 6.4.1 / ISL Port speed : 1G

I have a question here. If ISL's SFP Module needs to be replaced, can i just replace another SFP Moudle??

Does being bound by ISL mean that there is no need for special procedures??

Thanks!

 

Moderator

 • 

6.9K Posts

February 14th, 2023 07:00

Hello Blackhamer,

When replacing an SFP, follow these steps:

1.       Disable the Port (Also disable the port when a SFP is in Faulted or Missing state).

2.       Replace the SFP

3.       Enable the Port

Once all steps are performed, the Port should work fine.

1 Rookie

 • 

20.4K Posts

February 14th, 2023 09:00

If it's an ISL, you might have to disable/re-enable the port on the other side of the ISL link.  Sometimes if the other side goes offline due to CRC/BitErrors ..you have to "cycle" the port for the link to come back up.

Moderator

 • 

3.7K Posts

February 14th, 2023 18:00

Hello, thanks for choosing Dell. In case this may help:

 

 

 

https://dell.to/3I2p6Jv

 

https://dell.to/3lEvijm

 

 

 

 

 

 

 

https://dell.to/3YOqaaF

 

Connectrix: How to Interpret SFP Transceiver TX and RX Power Levels as Part of Troubleshooting the SFP Transceiver | Dell Singapore

No Events found!

Top