Unsolved
This post is more than 5 years old
45 Posts
0
463
November 19th, 2008 17:00
Issue updating Fabric
Hi All,
We have a pair of ds200b's. They have been running fine not a problem in the world.
My problem is when trying to a new zone for a new server, both switches are comming back with the message
"Failed to commit change to Fabric"
At first I thought this could be a issue with us being lazy and leaving our old config's, so I tried to remove some of the configs and got the same error. I had a look at the logs. Nothing was mentioned any where,
I had a look in the EMC support area and I'm about to check if there are any conlficting transactions.
Just wondering if any one else has experinced this issue?
Cheers
John
We have a pair of ds200b's. They have been running fine not a problem in the world.
My problem is when trying to a new zone for a new server, both switches are comming back with the message
"Failed to commit change to Fabric"
At first I thought this could be a issue with us being lazy and leaving our old config's, so I tried to remove some of the configs and got the same error. I had a look at the logs. Nothing was mentioned any where,
I had a look in the EMC support area and I'm about to check if there are any conlficting transactions.
Just wondering if any one else has experinced this issue?
Cheers
John
No Events found!
dynamox
11 Legend
•
20.4K Posts
•
87.4K Points
0
November 19th, 2008 20:00
emc104921
Loudenj
45 Posts
0
November 19th, 2008 21:00
I have done a few searchs on powerlink with no aval. Are you able to provide a link or some key search words.
Cheers
John
Loudenj
45 Posts
0
November 19th, 2008 22:00
dynamox
11 Legend
•
20.4K Posts
•
87.4K Points
0
November 20th, 2008 12:00
Thanks
RRR
6 Operator
•
5.7K Posts
0
November 21st, 2008 13:00
Loudenj
45 Posts
0
November 23rd, 2008 20:00
Yeap tried that, it is occuring on both switches which is worring me a bit.
I have found that I can create alias, Zones via the CLI. I have not yet created a new cfg as that is going to take a bit of typing, as I can not find a way to copy for clone via the cli.
For a while I thought it was browser issue however I have deployed one of our base MOE builds which worked previously, no joy. Also I doubt it is a java cache issue as the java console is not showing any errors.
Cheers
John
Loudenj
45 Posts
0
November 23rd, 2008 22:00
For no apparent reason that I can see, both switches have started working. All of my testing as been on one switch I have not done a thing to the other one. Both are now accepting changes via the zone administrator.
I wen through the errdump and fabric logs..nothing listed in there about any errors past or present. Got me stumped.
Cheers
John
RRR
6 Operator
•
5.7K Posts
0
November 30th, 2008 11:00
Keep us updated.