This post is more than 5 years old
6 Posts
0
4467
November 13th, 2011 08:00
Can DPA send alerts via SNMP traps to third party monitoring tools
Hi
Can DPA send alerts via SNMP traps to third party monitoring tools (HPOV,BMC).
Thanks,
V
No Events found!
ElvinKan
59 Posts
0
November 15th, 2011 12:00
Viv,
For DPA alerts, you need to set up what type of alerts you want first , then associate the SNMP trap to send out. If DPA is monitoring your Avamar, NetWorker and Data Domain as well, you can also configure DPA's Analysis/Rulesets to send SNMP traps but the main thing is that you need to decide why conditions and what types of events you want to be alerted on.
I suppose you could get Avamar to send snmp traps directly to your event management system - you will have to check with the Avamar team - and similarly for NetWorker and DD. If you choose this route, then you will need the Avamar, NetWorker and DD MIBs.
HTH
-E
ElvinKan
59 Posts
0
November 13th, 2011 20:00
Yes. You can set an alert of type SNMP which will send an snmp trap to which host you want. The mib file is located on the $DPA_INSTALL_DIR/mib sub-directory. This is also documented in the DPA 5.8 Admin Guide Page 95 onwards. HTH
vivkas
6 Posts
0
November 14th, 2011 23:00
Thanks Elvin
I could only see WYSDM Mib in the DPA directory.
I am planning to integrate SNMP traps for avamar/networker/data domain configured in my environment under DPA into our monitoring tools.
Where can get the avamar,networker and data domain MIBs
Thanks,
Viv