In the Report Editor (not the Report Item Editor), if you're on the "detailed table" or something similar, look at the "table data" icon (it looks like three stacked disks to me). In the box that opens with that icon, you can set the range you want for a field, such as, in your case, 1's, not 1000's, probably. (I'm more used to locking down MB instead of TB, but the idea should translate.)
dplaflamme1
37 Posts
0
August 3rd, 2011 13:00
In the Report Editor (not the Report Item Editor), if you're on the "detailed table" or something similar, look at the "table data" icon (it looks like three stacked disks to me). In the box that opens with that icon, you can set the range you want for a field, such as, in your case, 1's, not 1000's, probably. (I'm more used to locking down MB instead of TB, but the idea should translate.)
Nick
Enr2010
25 Posts
0
August 3rd, 2011 13:00
Hi Nick:
You did it man. It was setup for automatic and I did not realize thet by clicking on that field I could change the units.
I set it for 1 and it is working for me.
Thank, much appreciated your help.