Unsolved
This post is more than 5 years old
2 Intern
•
615 Posts
0
5841
April 27th, 2015 12:00
Feature Request
We sometimes power down standby or DR servers intentionally and leave them powered down but still keep them connected to power and network so we can easily bring them back up either manually through DRAC GUI or by script.
I would like a way in OME to see these not with a critical status but with something else I can assign and I would like when these power up for OME to be able to modify that status to OK. This way critical count is only urgent devices I need to work on.
0 events found
No Events found!
DELL-Rob C
4 Apprentice
•
2.8K Posts
0
April 28th, 2015 10:00
Hi there cameron.
Passing this request along, but a question:
Usually, when a system is powered down, it won't report as critical. It's only that the connection status will report as off/grey. If the device goes red prior to powering down for some reason, the last known health state would be reported (i.e., red). Do you know why your system in this case would be red? It should not be due to simply powering down.
Thanks!
Rob
cameronredux
2 Intern
•
615 Posts
0
April 28th, 2015 15:00
Hi Rob,
Any system I power down always shows Red in OME. I do run with ALL alerts enabled in DRAC. We power down with shutdown -h now command from OS and systems are healthy with latest firmware. I will confirm if I am seeing this for multiple Gens. Currently we only have 11Gen in this powered down state.