Unsolved
This post is more than 5 years old
4 Posts
0
2966
January 14th, 2006 21:00
Computer fails to boot
When I boot my computer I just get a black screen with the message that reads "X300 SE 128MB BIOS P/N 113-A33406-100"
nothing loads before or after. it just stays at this screen.
nothing loads before or after. it just stays at this screen.
No Events found!
BSeiter
31 Posts
0
January 14th, 2006 21:00
Please give us details about your computer and what led to this problem.....
Skiggles
4 Posts
0
January 15th, 2006 02:00
Demension 4700
160GB SATA HD
2.5 GB of RAM (2 added about a week or 2 ago)
P4
I recently reformatted about a week ago and everything had been working fine. Last night I was playing WoW and everything was working fine, I shut down and went to bed and when I woke up and turned my computer on I got that message. I haven't messed with any configurations or anything.
I tried opening it up and removing the battery then putting it back in. didn't help. I unplugged everything but my HD, RAM and Video card and same thing happened.I have also unplugged the hard hard drive and booted but same thing happens, So nothing is able to load because this loads first.
Skiggles
4 Posts
0
January 16th, 2006 04:00
DELL-Chris M
Community Manager
•
56.9K Posts
•
232.1K Points
0
January 16th, 2006 16:00
* Remove the X300 SE
* Attach the monitor to the onboard video card
* Power the the monitor on, then the PC
* When the blue Dell logo appears, press F2
* Down arrow to Video [press the ENTER key]
* Change to Onboard
* Press Escape to save the changes and Exit
* Does the PC bootup?