Unsolved
This post is more than 5 years old
4 Posts
0
18596
February 19th, 2004 17:00
Peripheral Configuration change by BIOS update
I just updated the BIOS on my XPS T500 from version A02 to A11. So far everything works, but when I looked back into the BIOS settings at startup, I noticed a change in the Peripheral Configuration setting for the "Mode". It was changed from "ECP" to "Bi-directional". Should I leave this change?
Thanks
No Events found!
DELL-Les
2 Intern
•
641 Posts
0
February 19th, 2004 17:00
bobangk,
Thank you for using the Dell Community Forum.
If this does not cause any problems then leave it. If it starts to cause problems then change it back.
bobangk
4 Posts
0
February 19th, 2004 17:00
Looks like "bi-directional" in my BIOS is what they are call EPP, which looks like it does the same thing as ECP.
Thanks for the help Les.
DELL-Les
2 Intern
•
641 Posts
0
February 19th, 2004 17:00
bobangk,
See the following link for a definition of this term.
http://www.webopedia.com/TERM/E/ECP.html
bobangk
4 Posts
0
February 19th, 2004 17:00