Unsolved
This post is more than 5 years old
2 Posts
0
78555
November 19th, 2013 00:00
Clear interface packet error statistics
After upgrading firmware to 6.06 (fromv5) I had several packet errors on the ethernet interfaces.
I disabled DCB and spanning tree on switch ports and now all works ok.
Is there a way to clear ethernet interface statistics without rebooting the controller and without switch off the ethernet card? (similar to ...Cisco's clear counters)
�
Any conseil will be appreciated.
0 events found
No Events found!
Origin3k
6 Operator
•
2.4K Posts
•
12.3K Points
0
November 19th, 2013 01:00
If you upgraded to 6.0.6 or 6.0.6H2? The first one was revoked and the H2 goes into a new 6.0.7. If you use 6.0.6 please upgrade urgent.
About reseting the error counter. We also ask about that and the answer was that only a "reset", which means a controller failover, would clear the counter.
Regards,
Joerg
davidemiccone
2 Posts
0
November 19th, 2013 01:00
Sorry, I wrote the wrong firmware version. I upgraded to 6.0.7.
>>>About reseting the error counter. We also ask about that and the answer was that only a "reset", which >>>means a controller failover, would clear the counter.
This is what I wish to avoid...
Thank you very much.