Unsolved
This post is more than 5 years old
2 Intern
•
192 Posts
0
8835
February 29th, 2012 13:00
PS6100X correct ip address scheme
the PS6100 series install guide does not have any IP addressing information.
What is the correct IP address scheme? Should all 4 eth ports be on the same subnet? or is it similar to the PowerVault with 4 separate iSCSI subnets.
No Events found!
jakesterpdx
1 Rookie
•
61 Posts
1
February 29th, 2012 15:00
I'll answer for the PS6100XS, which I assume is the same as the PS6100X. There are actually 5 ethernet ports, including the one management port. Put the 4 iscsi ports on the same subnet, and you'll actually get 5 ip addresses on that subnet, because you'll also get a virtual ip which you point your iscsi clients to. Optionally, you can put the management port on a different subnet, and it will also get two ip addresses - one virtual and one for the actual management ethernet port. You can connect on either address, but it's best practice to connect on the virtual address.
dirkdigs
2 Intern
•
192 Posts
0
February 29th, 2012 22:00
2 node hyper-v cluster clients to be more specific.
dirkdigs
2 Intern
•
192 Posts
0
February 29th, 2012 22:00
one or two nics for iscsi oon my clients?