These arrays are all RAID-50. The volumes are all set to Automatic. No volumes were specifically binded at any time to any one array. The array was initially RAID-10 and then expanded to RAID-50 before data was ever written to it - while it was in an isolated pool. Once the array expansion completed, I moved it into the existing SUMO pool with the other two arrays. I did this as I wanted to put the drives under load before putting the array into production.
canada-it
102 Posts
0
October 11th, 2012 08:00
Hi Don,
These arrays are all RAID-50. The volumes are all set to Automatic. No volumes were specifically binded at any time to any one array. The array was initially RAID-10 and then expanded to RAID-50 before data was ever written to it - while it was in an isolated pool. Once the array expansion completed, I moved it into the existing SUMO pool with the other two arrays. I did this as I wanted to put the drives under load before putting the array into production.
canada-it
102 Posts
0
October 11th, 2012 09:00
6.0.1
We just upgraded this weekend. All arrays were at 6.0.1 PRIOR to adding the new array into the same pool as the other two members.
Any other ideas?
canada-it
102 Posts
0
October 11th, 2012 10:00
Thanks for the help. Will do that and post back with the results when I get to that point.