Unsolved
This post is more than 5 years old
4 Posts
0
218851
October 13th, 2012 04:00
Warning when Rebuilding Disk
I have an Equalogic PS6010
Due to hard drive failed, I upgraded firmeware to version 6.0.1, Then i replaced hard drive, rebuild started
After many hours, i come back to check through GUI, I found that member is offline,
After checking, i got this warning message
Severity Date and Time Member ID Message
-------- --------------------- ------- ------ ------------------------------------------------------------
WARNING 13/10/2012 6:11:16 AM Member2 15.3.0 NVRAM contains valid data. This is a POWER FAILURE RECOVERY.
Now I restarted the array, the rebuild is again in progress
Can someone help me to understand the warning message and what can behind this.
Regards
0 events found
yassine.lasri
4 Posts
0
October 13th, 2012 07:00
Here are warning I've received from GUI
Severity Date and Time Member ID Message
-------- --------------------- ------- -------------------------------------- ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
WARNING 13/10/2012 9:18:06 AM Member2 28.3.51 | 28.3.24 | 28.3.53 Warning health conditions currently exist. Correct these conditions before they affect array operation. | Non-fatal RAID set failure. While the RAID set is degraded, performance and availability might be decreased. | There are 1 outstanding health conditions. Correct these conditions before they affect array operation.
INFO 13/10/2012 9:18:06 AM Member2 28.2.109 Expected number of spare drives now present.
INFO 13/10/2012 9:18:06 AM Member2 13.2.0 Disk 10 is online.
INFO 13/10/2012 9:18:06 AM Member2 32.2.11 Found and verified new drive: enclosure 0, drive 10, Model ST500NM0011, SN Z1M0LFLA.
INFO 13/10/2012 9:17:56 AM Member2 7.2.0 Drive 10 has been inserted.
WARNING 13/10/2012 9:17:00 AM Member2 7.3.15 Drive 10 has been removed.
WARNING 13/10/2012 9:17:00 AM Member2 28.3.51 | 28.3.24 | 28.3.119 | 28.3.53 Warning health conditions currently exist. Correct these conditions before they affect array operation. | Non-fatal RAID set failure. While the RAID set is degraded, performance and availability might be decreased. | More spare drives are expected. | There are 2 outstanding health conditions. Correct these conditions before they affect array operation.
WARNING 13/10/2012 9:17:00 AM Member2 13.3.0 Disk 10 is offline.
INFO 13/10/2012 9:16:34 AM Member2 14.2.10 Reconstruction of RAID LUN 0 resuming
WARNING 13/10/2012 9:16:34 AM Member2 28.3.51 | 28.3.24 | 28.3.53 Warning health conditions currently exist. Correct these conditions before they affect array operation. | Non-fatal RAID set failure. While the RAID set is degraded, performance and availability might be decreased. | There are 1 outstanding health conditions. Correct these conditions before they affect array operation.
INFO 13/10/2012 9:14:57 AM Member2 25.2.4 GUI: Account grpadmin from 10.10.1.16 logged in to 10.10.1.12, using local authentication. User privilege is group-admin.
INFO 13/10/2012 9:14:41 AM Member2 25.2.4 GUI: Account grpadmin from 10.10.1.16 logged in to 10.10.1.12, using local authentication. User privilege is group-admin.
INFO 13/10/2012 9:13:27 AM Member2 28.2.108 Control module in slot 0 with serial number RMS0943675G084K is designated as secondary.
INFO 13/10/2012 9:13:25 AM Member2 18.2.0 Group member Member2 now active in the group.
INFO 13/10/2012 9:13:15 AM Member2 28.2.39 Active control module cache set to write-back mode.
WARNING 13/10/2012 9:13:14 AM Member2 13.3.1 Disk drive 3 has a history of failure.
WARNING 13/10/2012 9:13:14 AM Member2 13.3.1 Disk drive 7 has a history of failure.
WARNING 13/10/2012 9:13:14 AM Member2 13.3.1 Disk drive 6 has a history of failure.
INFO 13/10/2012 9:13:13 AM Member2 9.2.0 PS Series Array Firmware Version: Storage Array Firmware V6.0.1 (R264419)
WARNING 13/10/2012 9:13:13 AM Member2 15.3.0 NVRAM contains valid data. This is a POWER FAILURE RECOVERY.
INFO 13/10/2012 9:13:09 AM Member2 28.2.6 Enclosure serial number: SHM0943824GEB3A.
WARNING 13/10/2012 9:13:01 AM Member2 15.3.0 NVRAM contains valid data. This is a POWER FAILURE RECOVERY.
INFO 13/10/2012 9:13:01 AM Member2 9.2.0 PS Series Array Firmware Version: Storage Array Firmware V6.0.1 (R264419)
INFO 13/10/2012 9:13:01 AM Member2 28.2.107 Control module in slot 1 with serial number RMS0943675G084Q is designated as active.
WARNING 13/10/2012 8:22:26 AM Member2 13.3.16 A request to initiate a mirror for drive 6 was unsuccessful.
WARNING 13/10/2012 8:17:24 AM Member2 13.3.16 A request to initiate a mirror for drive 6 was unsuccessful.
WARNING 13/10/2012 8:14:09 AM Member2 28.3.51 | 28.3.24 | 28.3.53 Warning health conditions currently exist. Correct these conditions before they affect array operation. | Non-fatal RAID set failure. While the RAID set is degraded, performance and availability might be decreased. | There are 1 outstanding health conditions. Correct these conditions before they affect array operation.
INFO 13/10/2012 8:14:09 AM Member2 28.2.11 Lost block entries have been cleared.
ERROR 13/10/2012 8:14:07 AM Member2 14.4.11 RAID LUN 0 bad sectors: lba=9706403033 len=1.
ERROR 13/10/2012 8:14:07 AM Member2 14.4.4 Unable to reconstruct bad sector 693318873 on drive 6 in RAID LUN 0.
WARNING 13/10/2012 8:14:07 AM Member2 28.3.51 | 28.3.24 | 28.3.27 | 28.3.53 Warning health conditions currently exist. Correct these conditions before they affect array operation. | Non-fatal RAID set failure. While the RAID set is degraded, performance and availability might be decreased. | Lost blocks detected in a RAID set. | There are 2 outstanding health conditions. Correct these conditions before they affect array operation.
ERROR 13/10/2012 8:14:07 AM Member2 14.4.0 Inserting bad block entries in RAID LUN 0.
INFO 13/10/2012 6:13:41 AM Member2 14.2.10 Reconstruction of RAID LUN 0 resuming
WARNING 13/10/2012 6:13:41 AM Member2 28.3.51 | 28.3.24 | 28.3.53 Warning health conditions currently exist. Correct these conditions before they affect array operation. | Non-fatal RAID set failure. While the RAID set is degraded, performance and availability might be decreased. | There are 1 outstanding health conditions. Correct these conditions before they affect array operation.
INFO 13/10/2012 6:13:31 AM Member2 25.2.4 GUI: Account grpadmin from 10.10.1.16 logged in to 10.10.1.12, using local authentication. User privilege is group-admin.
INFO 13/10/2012 6:11:41 AM Member2 28.2.108 Control module in slot 0 with serial number RMS0943675G084K is designated as secondary.
INFO 13/10/2012 6:11:41 AM Member2 18.2.0 Group member Member2 now active in the group.
INFO 13/10/2012 6:11:30 AM Member2 28.2.39 Active control module cache set to write-back mode.
WARNING 13/10/2012 6:11:29 AM Member2 13.3.1 Disk drive 7 has a history of failure.
WARNING 13/10/2012 6:11:29 AM Member2 13.3.1 Disk drive 6 has a history of failure.
INFO 13/10/2012 6:11:27 AM Member2 9.2.0 PS Series Array Firmware Version: Storage Array Firmware V6.0.1 (R264419)
WARNING 13/10/2012 6:11:27 AM Member2 15.3.0 NVRAM contains valid data. This is a POWER FAILURE RECOVERY.
INFO 13/10/2012 6:11:24 AM Member2 28.2.6 Enclosure serial number: SHM0943824GEB3A.
WARNING 13/10/2012 6:11:16 AM Member2 15.3.0 NVRAM contains valid data. This is a POWER FAILURE RECOVERY.
INFO 13/10/2012 6:11:16 AM Member2 9.2.0 PS Series Array Firmware Version: Storage Array Firmware V6.0.1 (R264419)
INFO 13/10/2012 6:11:16 AM Member2 28.2.107 Control module in slot 1 with serial number RMS0943675G084Q is designated as active.
INFO 13/10/2012 3:00:45 AM Member2 25.2.4 GUI: Account grpadmin from 10.10.1.16 logged in to 10.10.1.12, using local authentication. User privilege is group-admin.
INFO 13/10/2012 1:48:38 AM Member2 25.2.6 CLI: Account grpadmin logged out.
INFO 12/10/2012 8:26:56 PM Member2 7.2.15 | 7.2.17 iSCSI session to target '10.10.1.12:3260, iqn.2001-05.com.equallogic:0-8a0906-1c08e4108-f7efb16b3f34d274-backups' from initiator '10.10.1.14:55673, iqn.1991-05.com.microsoft:arisserv' was closed. | Logout request was received from the initiator.
INFO 12/10/2012 8:25:12 PM Member2 7.2.13 iSCSI login to target '10.10.1.12:3260, iqn.2001-05.com.equallogic:0-8a0906-1c08e4108-f7efb16b3f34d274-backups' from initiator '10.10.1.14:55673, iqn.1991-05.com.microsoft:arisserv' successful, using standard frame length.
WARNING 12/10/2012 8:09:48 PM Member2 28.3.51 | 28.3.24 | 28.3.53 Warning health conditions currently exist. Correct these conditions before they affect array operation. | Non-fatal RAID set failure. While the RAID set is degraded, performance and availability might be decreased. | There are 1 outstanding health conditions. Correct these conditions before they affect array operation.
INFO 12/10/2012 8:09:48 PM Member2 28.2.109 Expected number of spare drives now present.
INFO 12/10/2012 8:09:48 PM Member2 13.2.10 Creating a RAID label for uninitialized drive 10.
INFO 12/10/2012 8:09:48 PM Member2 13.2.0 Disk 10 is online.
INFO 12/10/2012 8:09:48 PM Member2 32.2.11 Found and verified new drive: enclosure 0, drive 10, Model ST1000NM0011, SN Z1N28WDH.
INFO 12/10/2012 8:09:39 PM Member2 7.2.0 Drive 10 has been inserted.
WARNING 12/10/2012 8:09:23 PM Member2 13.3.0 Disk 10 is offline.
WARNING 12/10/2012 8:09:23 PM Member2 7.3.15 Drive 10 has been removed.
INFO 12/10/2012 8:05:09 PM Member2 25.2.4 GUI: Account grpadmin from 10.10.1.16 logged in to 10.10.1.12, using local authentication. User privilege is group-admin.
INFO 12/10/2012 7:55:28 PM Member2 30.2.9 Array firmware has been successfully updated. Running Storage Array Firmware V6.0.1 (R264419).
INFO 12/10/2012 7:55:23 PM Member2 28.2.108 Control module in slot 0 with serial number RMS0943675G084K is designated as secondary.
INFO 12/10/2012 7:55:09 PM Member2 9.2.0 PS Series Array Firmware Version: Storage Array Firmware V6.0.1 (R264419)
INFO 12/10/2012 7:54:01 PM Member2 25.2.4 GUI: Account grpadmin from 10.10.1.16 logged in to 10.10.1.12, using local authentication. User privilege is group-admin.
INFO 12/10/2012 7:53:41 PM Member2 14.2.9 Reconstruction of RAID LUN 0 initiated.
WARNING 12/10/2012 7:53:41 PM Member2 28.3.51 | 28.3.24 | 28.3.119 | 28.3.53 Warning health conditions currently exist. Correct these conditions before they affect array operation. | Non-fatal RAID set failure. While the RAID set is degraded, performance and availability might be decreased. | More spare drives are expected. | There are 2 outstanding health conditions. Correct these conditions before they affect array operation.
WARNING 12/10/2012 7:53:41 PM Member2 28.3.51 | 28.3.119 | 28.3.53 Warning health conditions currently exist. Correct these conditions before they affect array operation. | More spare drives are expected. | There are 1 outstanding health conditions. Correct these conditions before they affect array operation.
INFO 12/10/2012 7:51:53 PM Member2 28.2.6 Enclosure serial number: SHM0943824GEB3A.
INFO 12/10/2012 7:51:41 PM Member2 18.2.0 Group member Member2 now active in the group.
INFO 12/10/2012 7:51:37 PM Member2 28.2.119 Failover completed for control module in slot 1 with serial number RMS0943675G084Q.
ERROR 12/10/2012 7:51:37 PM Member2 14.4.17 Orphan drive: drive LUN 7 (8e41088a0900-19465002-e) no longer belongs to RAID LUN 0 (8e41088a0900-bf07b52e-fb16b3e4) and will be made into a spare disk.
ERROR 12/10/2012 7:51:37 PM Member2 14.4.18 Orphan drive: drive LUN 10 (8e41088a0900-192f47bb-b) no longer belongs to RAID LUN 0 (8e41088a0900-bf07b52e-fb16b3e4). This drive has a history of failure and will not be used.
WARNING 12/10/2012 7:51:37 PM Member2 13.3.1 Disk drive 10 has a history of failure.
WARNING 12/10/2012 7:51:37 PM Member2 13.3.1 Disk drive 6 has a history of failure.
INFO 12/10/2012 7:51:35 PM Member2 28.2.39 Active control module cache set to write-back mode.
INFO 12/10/2012 7:51:25 PM Member2 30.2.0 Restarting member with options '-N'.
INFO 12/10/2012 7:48:37 PM Member2 30.2.1 Restarting secondary control module with options ' '.
INFO 12/10/2012 7:48:35 PM Member2 30.2.8 Completed firmware update from V5.2.5 to V6.0.1 on control module in slot 1, serial number RMS0943675G084Q.
INFO 12/10/2012 7:48:31 PM Member2 30.2.7 Starting firmware update from V5.2.5 to V6.0.1 on control module in slot 1, serial number RMS0943675G084Q.
INFO 12/10/2012 7:47:25 PM Member2 30.2.6 Completed copy of firmware V6.0.1 to the compact flash.
WARNING 12/10/2012 7:37:13 PM Member2 47.3.0 'diag' or 'update' was unable to send output using e-mail. SMTP returned the following error: TimeOut
INFO 12/10/2012 7:36:49 PM Member2 30.2.5 Starting copy of firmware V6.0.1 to the compact flash.
INFO 12/10/2012 7:34:36 PM Member2 25.2.4 GUI: Account grpadmin from 10.10.1.16 logged in to 10.10.1.12, using local authentication. User privilege is group-admin.
INFO 12/10/2012 7:34:06 PM Member2 30.2.9 Array firmware has been successfully updated. Running Storage Array Firmware V5.2.5 (R264411).
INFO 12/10/2012 7:34:02 PM Member2 28.2.108 Control module in slot 1 with serial number RMS0943675G084Q is designated as secondary.
INFO 12/10/2012 7:33:48 PM Member2 9.2.0 PS Series Array Firmware Version: Storage Array Firmware V5.2.5 (R264411)
INFO 12/10/2012 7:31:47 PM Member2 7.2.13 iSCSI login to target '10.10.1.12:3260, iqn.2001-05.com.equallogic:0-8a0906-1c08e4108-f7efb16b3f34d274-backups' from initiator '10.10.1.14:49160, iqn.1991-05.com.microsoft:arisserv' successful, using standard frame length.
INFO 12/10/2012 7:30:57 PM Member2 28.2.6 Enclosure serial number: SHM0943824GEB3A.
WARNING 12/10/2012 7:30:48 PM Member2 28.3.51 | 28.3.119 | 28.3.53 Warning health conditions currently exist. Correct these conditions before they affect array operation. | More spare drives are expected. | There are 1 outstanding health conditions. Correct these conditions before they affect array operation.
INFO 12/10/2012 7:30:45 PM Member2 18.2.0 Group member Member2 now active in the group.
INFO 12/10/2012 7:30:40 PM Member2 28.2.119 Failover completed for control module in slot 0 with serial number RMS0943675G084K.
WARNING 12/10/2012 7:30:40 PM Member2 13.3.1 Disk drive 6 has a history of failure.
INFO 12/10/2012 7:30:39 PM Member2 28.2.39 Active control module cache set to write-back mode.
INFO 12/10/2012 7:30:29 PM Member2 30.2.0 Restarting member with options '-N'.
INFO 12/10/2012 7:29:18 PM Member2 25.2.5 GUI: Account grpadmin from 10.10.1.16 to 10.10.1.12 logged out.
INFO 12/10/2012 7:28:21 PM Member2 30.2.1 Restarting secondary control module with options ' '.
INFO 12/10/2012 7:28:19 PM Member2 30.2.8 Completed firmware update from V5.0.8 to V5.2.5 on control module in slot 0, serial number RMS0943675G084K.
INFO 12/10/2012 7:28:17 PM Member2 30.2.7 Starting firmware update from V5.0.8 to V5.2.5 on control module in slot 0, serial number RMS0943675G084K.
WARNING 12/10/2012 7:28:15 PM Member2 28.3.17 Active control module cache is now in write-through mode. Array performance is degraded.
INFO 12/10/2012 7:27:36 PM Member2 30.2.6 Completed copy of firmware V5.2.5 to the compact flash.
INFO 12/10/2012 7:18:58 PM Member2 30.2.5 Starting copy of firmware V5.2.5 to the compact flash.
WARNING 12/10/2012 7:15:24 PM Member2 47.3.0 'diag' or 'update' was unable to send output using e-mail. SMTP returned the following error: TimeOut
INFO 12/10/2012 7:12:30 PM Member2 25.2.4 GUI: Account grpadmin from 10.10.1.16 logged in to 10.10.1.12, using ÐÐÐÐ943675G084K authentication. User privilege is ÐÐÐÐ.
INFO 12/10/2012 7:12:21 PM Member2 30.2.9 Array firmware has been successfully updated. Running Storage Array Firmware V5.0.8 (R191283).
INFO 12/10/2012 7:12:17 PM Member2 28.2.108 Control module in slot 0 with serial number RMS0943675G084K is designated as secondary.
WARNING 12/10/2012 7:09:53 PM Member2 28.3.51 | 28.3.119 | 28.3.53 Warning health conditions currently exist. Correct these conditions before they affect array operation. | More spare drives are expected. | There are 1 outstanding health conditions. Correct these conditions before they affect array operation.
INFO 12/10/2012 7:09:51 PM Member2 18.2.0 Group member Member2 now active in the group.
INFO 12/10/2012 7:09:44 PM Member2 28.2.39 Active control module cache set to write-back mode.
INFO 12/10/2012 7:09:44 PM Member2 28.2.107 Control module in slot 1 with serial number RMS0943675G084Q is designated as active.
WARNING 12/10/2012 7:09:44 PM Member2 13.3.1 Disk drive 6 has a history of failure.
WARNING 12/10/2012 7:09:41 PM Member2 32.3.29 Failure: HDD Drive: 10, Model: ST3500514NS, Serial Number: 9WJ052N3
INFO 12/10/2012 7:09:38 PM Member2 28.2.6 Enclosure serial number: SHM0943824GEB3A.
WARNING 12/10/2012 7:09:19 PM Member2 32.3.29 Failure: HDD Drive: 7, Model: ST3500514NS, Serial Number: 9WJ04TWD
WARNING 12/10/2012 7:09:18 PM Member2 28.3.17 Active control module cache is now in write-through mode. Array performance is degraded.
INFO 12/10/2012 7:09:04 PM Member2 30.2.0 Restarting member with options '-N'.
INFO 12/10/2012 7:07:28 PM Member2 30.2.1 Restarting secondary control module with options ' '.
INFO 12/10/2012 7:07:27 PM Member2 30.2.8 Completed firmware update from V4.3.0 to V5.0.8 on control module in slot 1, serial number RMS0943675G084Q.
INFO 12/10/2012 7:07:24 PM Member2 30.2.7 Starting firmware update from V4.3.0 to V5.0.8 on control module in slot 1, serial number RMS0943675G084Q.
WARNING 12/10/2012 7:07:22 PM Member2 28.3.17 Active control module cache is now in write-through mode. Array performance is degraded.
WARNING 12/10/2012 7:07:19 PM Member2 32.3.18 Preemptive removal of enclosure 0, drive 6 has been denied.
WARNING 12/10/2012 7:07:19 PM Member2 32.3.18 Preemptive removal of enclosure 0, drive 6 has been denied.
INFO 12/10/2012 7:05:48 PM Member2 30.2.6 Completed copy of firmware V5.0.8 to the compact flash.
WARNING 12/10/2012 7:02:38 PM Member2 32.3.18 Preemptive removal of enclosure 0, drive 6 has been denied.
WARNING 12/10/2012 7:02:38 PM Member2 32.3.18 Preemptive removal of enclosure 0, drive 6 has been denied.
INFO 12/10/2012 6:56:25 PM Member2 30.2.5 Starting copy of firmware V5.0.8 to the compact flash.
WARNING 12/10/2012 6:52:04 PM Member2 32.3.18 Preemptive removal of enclosure 0, drive 6 has been denied.
WARNING 12/10/2012 6:52:04 PM Member2 32.3.18 Preemptive removal of enclosure 0, drive 6 has been denied.
INFO 12/10/2012 6:50:11 PM Member2 25.2.4 GUI: Account grpadmin from 10.10.1.16 logged in to 10.10.1.12, using ÐÐÐÐ43675G084Q authentication. User privilege is ÐÐÐÐ.
INFO 12/10/2012 6:49:38 PM Member2 25.2.5 GUI: Account grpadmin from 10.10.1.16 to 10.10.1.12 logged out.
INFO 12/10/2012 6:48:31 PM Member2 25.2.4 GUI: Account grpadmin from 10.10.1.16 logged in to 10.10.1.12, using ÐÐÐÐ43675G084Q authentication. User privilege is ÐÐÐÐ.
INFO 12/10/2012 6:48:03 PM Member2 25.2.5 GUI: Account grpadmin from 10.10.1.16 to 10.10.1.12 logged out.
INFO 12/10/2012 6:47:08 PM Member2 25.2.4 GUI: Account grpadmin from 10.10.1.16 logged in to 10.10.1.12, using ÐÐÐÐ43675G084Q authentication. User privilege is ÐÐÐÐ.
INFO 12/10/2012 6:46:59 PM Member2 25.2.5 GUI: Account grpadmin from 10.10.1.16 to 10.10.1.12 logged out.
INFO 12/10/2012 6:46:35 PM Member2 25.2.4 GUI: Account grpadmin from 10.10.1.16 logged in to 10.10.1.12, using ÐÐÐÐ43675G084Q authentication. User privilege is ÐÐÐÐ.
INFO 12/10/2012 5:04:26 PM Member2 25.2.5 GUI: Account grpadmin from 10.10.1.16 to 10.10.1.12 logged out.
INFO 12/10/2012 4:38:31 PM Member2 7.2.15 | 7.2.17 iSCSI session to target '10.10.1.12:3260, iqn.2001-05.com.equallogic:0-8a0906-1c08e4108-f7efb16b3f34d274-backups' from initiator '10.10.1.14:49160, iqn.1991-05.com.microsoft:arisserv' was closed. | Logout request was received from the initiator.
WARNING 12/10/2012 4:07:14 PM Member2 32.3.18 Preemptive removal of enclosure 0, drive 6 has been denied.
WARNING 12/10/2012 4:07:14 PM Member2 32.3.18 Preemptive removal of enclosure 0, drive 6 has been denied.
yassine.lasri
4 Posts
0
October 13th, 2012 07:00
No power issue, the array has 16 slots, each slot a drive of 500GB size
I replaced slot 10 with a drive of 1TB size, is that can create a problem ?