You can list disks (and available free slices) via the following command
symdisk -sid xxx -diskgroup y -v -gaps list
You'll have to sum all the freespace you have in every disk .. But this command will also show you how the freespace is layed out on the disks, helping you in planning new volumes.
xe2sdc
4 Operator
•
2.8K Posts
1
December 16th, 2008 02:00
symdisk -sid xxx -diskgroup y -v -gaps list
You'll have to sum all the freespace you have in every disk .. But this command will also show you how the freespace is layed out on the disks, helping you in planning new volumes.