Unsolved
This post is more than 5 years old
131 Posts
0
496
December 30th, 2008 06:00
R1/R2 meta expansion
Hello,
we did not try any meta expansion but want to start doing it. I want to expand a R1/R2 meta expansion. I know a process but thought might be there something simple. The device i want to expand is a replication device in an async mode. So I read on powerlink that first need to suspend the replication,delete the pair and then expand seperately R1 & R2. Then recreate the pair and do a full establish to R2. So is there any other way we could achive this ?
Thanks,
Ramesh
we did not try any meta expansion but want to start doing it. I want to expand a R1/R2 meta expansion. I know a process but thought might be there something simple. The device i want to expand is a replication device in an async mode. So I read on powerlink that first need to suspend the replication,delete the pair and then expand seperately R1 & R2. Then recreate the pair and do a full establish to R2. So is there any other way we could achive this ?
Thanks,
Ramesh
No Events found!
xe2sdc
6 Operator
•
2.8K Posts
0
December 31st, 2008 14:00
The long answer involves a little digging in your actual configuration but you still need a full establish .. Recent codes may reduce impact on your SRDF/A replica .. but nothing changes at the root of the procedure.
RRR
6 Operator
•
5.7K Posts
0
February 16th, 2009 03:00
Please mark your question as answered.