Unsolved
1 Message
0
132
March 16th, 2023 08:00
issue with triple monitors setup!
Hello everyone , I have an issue with my third Dell monitor ( currently I'm working with 2 ). the issue is that it doesn't display despite being detected on my computer , it keeps showing that ( No VGA cable / No Dvi dable / No DP cable ).
Information that may be useful:
1st dell monitor is E228WFP ( connected using DP to hdmi (adapter) ---(hdmi cable)-- hdmi to dvi-D ( adapter ) )
2nd dell monitor is E2210 ( connected using DP to hdmi cable --- hdmi to dvi-D (adapter) )
3rd dell monitor is P2210 ( I tried everything even just DP to DP cable and disconnected the other two monitors still didn't work ) ( only VGA to VGA worked on my laptop )
I'm on windows 10 x64 , I'm using an Nvidia RTX 3060 12Gb ( MSI gaming X ) , I also installed the drivers for the monitors although the two first monitors were working fine even before that .
Thank you
vishvajitd
2 Intern
•
278 Posts
0
March 17th, 2023 03:00
You mentioned that you have installed the drivers for the monitors, but it might be worth checking if the driver for the P2210 is properly installed. You can try updating the driver or reinstalling it.
Another thing you can try is to check the display settings on your computer and make sure that the P2210 is set as an extended display. Sometimes, the monitor may not display if it is set as a duplicate or the primary display.
If none of these solutions work, then it's possible that the P2210 monitor is faulty and needs to be replaced.