Unsolved
2 Intern
•
42 Posts
0
580
February 10th, 2023 20:00
Corrupt Recovery Partition
Is it possible to repair a corrupted recovery partition? My Inspiron N5050 laptop cannot boot from said partition, or from the recovery disc either (recently made). It seems a file is missing (or corrupted) called "windows\system32\boot\winload.exe" on both the partition and the recovery disc.
I did a workaround by doing a clean install of Windows 7 via my Dell Inspiron 620, Dell-branded Windows 7 installation disc. Things seem to be working OK so far, so I probably will keep thing as they are, but I was just wondering if the recovery partition could be repaired - or maybe make a new one with my current setup?
In addition, I may go a step further and install a newer 7200 RPM drive in the laptop. Any recommendations for cloning the old disc onto the newer one?
sonuprsd.nss
7 Posts
0
February 11th, 2023 01:00
It is possible to repair a corrupted recovery partition, but the methods for doing so can vary depending on the cause of the corruption and the specific computer you have. In your case, it appears that the file "windows\system32\boot\winload.exe" is missing or corrupted on both the recovery partition and the recovery disc, which is preventing your computer from booting from either.
To repair the recovery partition, you can try the following steps:
Boot the computer from a Windows installation disc and choose the "Repair your computer" option.
In the System Recovery Options menu, choose "Startup Repair." This will scan your system and try to automatically repair any issues that are preventing it from booting properly.
If the Startup Repair tool cannot repair the issue, you can try running the "sfc /scannow" command from the Command Prompt. This will scan your system files and attempt to replace any missing or corrupted files.
If these steps do not work, you can try creating a new recovery partition using the Dell Backup and Recovery tool or another third-party partitioning tool.
As for installing a new 7200 RPM drive in your laptop, you can use a cloning software such as Acronis True Image, EaseUS Todo Backup, or Norton Ghost to clone the old disk to the new one. Make sure to properly backup your important data before performing any disk-related operations, as there is always a risk of data loss.
If none of these steps resolve the issue, you may need to bring your device to a repair center for further diagnosis and repair. It's also a good idea to check your device's warranty status, as the keyboard issue may be covered under warranty, else you can visit nss laptop service center for affordable after warranty repair.
rusty.07
2 Intern
•
42 Posts
0
February 14th, 2023 13:00
What command line text would I use to access and repair the recovery partition itself? All I can currently access is the C (OS) partition.
As for the DBAR tool, this is the message I am getting when I went to download it...
rusty.07
2 Intern
•
42 Posts
0
February 27th, 2023 09:00
As for cloning a hard drive, I created an image with Macrium Reflect (free) onto a flash drive. What is my next move? Install the new drive and use bootable media to write the image to said drive? Is that possible with Macrium free, or do I need a license?