Unsolved

1 Rookie

 • 

6 Posts

44

November 15th, 2025 07:08

Not start workstation (laptop)

When I put it in charging laptop not start charging indicating light also when I push the power button just blink power button indicating light but not start laptop how I can resolve it ?

3 Apprentice

 • 

1.3K Posts

November 15th, 2025 10:31

Please can you confirm the Make Model and OS, along with any configuration details like touch screen, backlit keyboard, SFF or tower etc etc.

Hard Reset?

Diagnostic?

1 Rookie

 • 

6 Posts

November 15th, 2025 10:50

I have dell inspiron 7760 i9 linux system 

1 Rookie

 • 

6 Posts

November 15th, 2025 10:54

Last time I used that time battry is near to the very low then after 3 day I see laptop is not possible to start also when I put in charging then not showing any charging indicating light, fan shound, beep nothing have 

3 Apprentice

 • 

1.3K Posts

November 15th, 2025 11:10

Please can you confirm the Make Model and OS, along with any configuration details like touch screen, backlit keyboard, SFF or tower etc etc.

There is no Dell Inspiron 7760 model according to available information. The closest matching model with the number 7760 is the Dell Precision 7760, which is a high-end 17.3-inch mobile workstation laptop designed for professional use, not an Inspiron series device. The Dell Precision 7760 features configurations like Intel Core i7 or i9 processors, up to 64GB RAM, and various high-performance GPUs, targeted at CAD and workstation tasks.

https://www.dell.com/support/product-details/en-us/product/precision-17-7760-laptop/overview

There are updates (have any been applied recently?) .....

Dell Dock WD19/WD22TB4 Firmware Update Utility
Recommended  21 Oct 2025  Docks/Stands  Download
Dell Precision 7560/7760 System BIOS
Recommended  17 Sep 2025  BIOS  Download
Dell Command | Configure Application
Recommended  27 Feb 2025  Systems Management  Download
Dell Command | Monitor  
Critical  31 Oct 2023  Systems Management
Ubuntu Recovery Image
Optional  24 Jul 2023  ISO Image
Check your PSU and run a Diagnostic if possible.
Also the CMOS coin cell battery is 5 years old?

1 Rookie

 • 

6 Posts

November 15th, 2025 12:45

Last update firmware in October i have done and this model who is purchases first time in 2022 purchases then I buy the 4 month before used laptop, I dont have good knowledge about battry because is internally have

3 Apprentice

 • 

1.3K Posts

November 16th, 2025 12:49

Hi

I think you need to make sure the power supply unit works.

Take it to a local repairer if you cannot open the back of the laptop.

https://www.dell.com/support/manuals/en-us/precision-17-7760-laptop/precision_7760_sm/removing-the-battery?guid=guid-b631c6e4-d917-4329-a1ab-2f5e25a0e9bd&lang=en-us

1 Rookie

 • 

6 Posts

November 16th, 2025 13:55

I was open back cover and remove battry then push it power button 20 to 40 second for the drain power also again connect battry and checked but not possible to start when I push power button only i get indicating light in power button nothing more ani beep,fan sound, not possible charge because not getting charging indicating light when I put in charge 

3 Apprentice

 • 

1.3K Posts

November 16th, 2025 14:12

Hi

Try without a battery connected, only PSU, and RUN SOME DIAGNOSTICS if possible.

https://www.dell.com/support/manuals/en-us/precision-17-7760-laptop/precision_7760_sm/built-in-self-test-bist?guid=guid-63d84cdd-b1bb-4328-a95f-b0b3636fe589&lang=en-us

EG:

Consider trying this is the conditions are suitable...

NOTE: M-BIST must be initiated on the system from a power-off state either connected to AC power or with battery only.
  1. Press and hold both the M key on the keyboard and the power button to initiate M-BIST.
  2. With both the M key and the power button held down, the battery indicator LED may exhibit two states:
    1. OFF: No fault detected with the system board
    2. AMBER: Indicates a problem with the system board
  3. If there is a failure with the system board, the battery status LED will flash one of the following error codes for 30 seconds:
    Table 1. LED error codes
    Blinking Pattern Possible Problem
    Amber White
    2 1 CPU Failure
    2 8 LCD Power Rail Failure
    1 1 TPM Detection Failure
    2 4 Unrecoverable SPI Failure
  4. If there is no failure with the system board, the LCD will cycle through the solid color screens described in the LCD-BIST section for 30 seconds and then power off.

1 Rookie

 • 

6 Posts

November 20th, 2025 19:19

When I pushed M + Power button key then 30 second one time blink the power button indicating light ... 

3 Apprentice

 • 

1.3K Posts

November 21st, 2025 16:05

Hi

I cannot think of anything else to add to the help already offered.

Your feedback is very limited, and gives no real clues to the  situation.

So,I wish you luck.

BYE.

Top