Unsolved

This post is more than 5 years old

831

July 11th, 2020 04:00

pci express ssd only

I have a Dell Insperion 15 7579 2-in1. This model does not have any place to install a SATA drive, however it does have a pci express M-2 slot. I installed a brand new WD Blue M-2 ssd.  I installed exactly as shown by the Dell video. When I turn it on, it reads No Hard Drive installed. The system diog (F-12) also reads no hard drive installed. My question is Why won't it read my drive? 

12 Elder

 • 

31.3K Posts

 • 

154.6K Points

July 11th, 2020 05:00

WD Blue drives come in both SATA and NVMe formats.  Your system requires SATA - it will not take an NVMe drive.

Verify the model you purchased with WD to ensure it's SATA. If it's NVMe, you'll need to exchange it for the SATA version.

1 Rookie

 • 

45 Posts

July 11th, 2020 06:00

I thought pcie means it would support NVME....It doesn't?

i own a inspiron 3593 i3 10 th gen.....controller says sata/pcie rst controller.........will it support NVME?

12 Elder

 • 

31.3K Posts

 • 

154.6K Points

July 11th, 2020 06:00

The 3593 is a newer system and does support NVMe drives.

I think the original post author mis-interpreted M.2 as PCI Express.  M.2 is a connector, which is the physical connection to the SSD.  It specifies nothing about the electrical interface.  M.2 can support NVMe, NVMe or SATA, or SATA only.

The original post asked about a system sold about three years ago, when the NVMe revolution had just started.  It was a feature included on high end systems at that point - not on mid-range systems.  The system that person has supports M.2 -- but SATA only.  No NVMe.

 

12 Elder

 • 

31.3K Posts

 • 

154.6K Points

July 11th, 2020 09:00

1 Rookie

 • 

45 Posts

July 11th, 2020 09:00

Thank you for the reply

can i ask you one more question?

what is the lane on the pci e port of my 3593 laptop? x2 or x4?....i just could not find this info anywhere

No Events found!

Top