This post is more than 5 years old
25 Posts
0
8752
September 6th, 2013 06:00
SyncIQ Ports
Is there any information on what ports need to be opened for SynchIQ?
No Events found!
This post is more than 5 years old
25 Posts
0
8752
September 6th, 2013 06:00
Is there any information on what ports need to be opened for SynchIQ?
Top
Peter_Sero
6 Operator
•
1.2K Posts
0
September 6th, 2013 07:00
SyncIQ v1 uses the following TCP ports:
SyncIQ v2 uses the following TCP ports:
From:
https://emc--c.na5.visual.force.com/apex/KB_BreakFix_1?id=kA1700000000QoV&popup=true
-- Peter
varunmalhi
25 Posts
0
September 6th, 2013 07:00
Peter,
Can one tell what SynchIQ version the customer is running without having to ask them? I mean is the SynchIQ version related in anyway to the OneFS version. The customer is running OneFS 7.0 and it is a completely new install.
Peter_Sero
6 Operator
•
1.2K Posts
0
September 6th, 2013 08:00
That's actually SyncIQ v3...
(Grrr, those old KB articles just appear with a too recent "publishing" date in SF,
always look at the fine print)
But if you look at the compatibility matrix, v2 -> v3 works, so v3 can hardly use different ports.
-- Peter
christopher_ime
6 Operator
•
2K Posts
1
September 6th, 2013 19:00
SyncIQ v3 uses the following TCP ports:
isi_migr_sworker: 5667
isi_migr_bandwidth: 3148
isi_migr_pworker: 2098
steamboat_
1 Message
0
December 11th, 2014 15:00
To add to this post, I see one additional port listed (3149) in the doc titled "docu54200_OneFS-7.1.1-Security-Configuration-Guide.pdf"
Consolidated to a single table below;