Unsolved
This post is more than 5 years old
2 Posts
0
4795
August 24th, 2005 04:00
BSOD/Stop Error Message - Inspiron 8600
I have had this laptop for a little over a year now with several motherboard replacements and problems. I have not changed any hardware or added any. This just started popping up when changing CD's in the drive and turning off my external HDD. It doesn't do it all the time, but is starting to do it more frequently. What do I need to do to fix this problem? Thanks. Below is the error message which appears on a blue screen.
A problem has been detected and windows has be shut down to prevent damage to your computer.
IRQL_NOT_LESS_OR_EQUAL
If this is the first time you have seen this stop error screen restare your computer. If this screen apears again follow these steps.
Check to make sure any new hardware or software is properly installed. If this is a new installation ask your hardware or software manufacturer for any windows updates you mignt need.
If problems continue, disable or remove any newly installed hardware or software. Disable bios memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restare your computer, press F8 to select advanced stareup options, and then select safe mode.
Technical information:
... stop: 0x0000000A (0X00000000, 0x00000002, 0x00000000, 0x804DBC95)
Beginning dump of physical memore physical memory dmp complete. Contact your system administrator or technical support group for further assistance.
A problem has been detected and windows has be shut down to prevent damage to your computer.
IRQL_NOT_LESS_OR_EQUAL
If this is the first time you have seen this stop error screen restare your computer. If this screen apears again follow these steps.
Check to make sure any new hardware or software is properly installed. If this is a new installation ask your hardware or software manufacturer for any windows updates you mignt need.
If problems continue, disable or remove any newly installed hardware or software. Disable bios memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restare your computer, press F8 to select advanced stareup options, and then select safe mode.
Technical information:
... stop: 0x0000000A (0X00000000, 0x00000002, 0x00000000, 0x804DBC95)
Beginning dump of physical memore physical memory dmp complete. Contact your system administrator or technical support group for further assistance.
No Events found!
timboyk12
44 Posts
0
August 24th, 2005 22:00
eye4aneye
2 Posts
0
August 25th, 2005 01:00