Unsolved
This post is more than 5 years old
4 Posts
0
9803
November 3rd, 2006 02:00
dual channel memory
my inspiron 6400 came with 1 stick of 1gb memory but ive been reading that i should be really using 2 identicall sticks.
does it really make that much difference? what sort of performance increase would i get with dual cannel mode?
and when people say identical do they mean it has to be same size, speed or even make?
ta
No Events found!



fruitylooper
4 Posts
0
November 3rd, 2006 03:00
dbramlet
2.2K Posts
0
November 3rd, 2006 03:00
Have you been in the market for memory lately? You may notice that memory comes in standard, one memory modules, and also Dual Channel Kits. What’s the difference? There is really no difference other then Dual Channel Kits are two modules instead of one. These are meant to be run in dual channel. You can still get two single modules and run them in dual channel. The kits are sold as tested to work in dual channel. If the memory stick of any kind of memory is compatible to be run at stock speed with stock latency, it will work in dual channel mode. The kits are sold more for the novice, so they know that they are getting what they need. I know when I bought my RAM there were no dual channel kits available for my memory; I bought two one stick packages and have experienced no problems with them.
What is dual channel and what are the benefits? First you must see whether your current motherboard supports dual channeling. Whether or not your motherboard supports dual channel lies within the memory controller. Most modern day memory controllers support dual channeling, though there are a few which don’t: the AMD Athlon 64 series with the 754 socket does not support dual channeling, but the newer 939 socket does. On the Athlon 64 series the memory controller lies within the CPU.
Nearly all desktop Intel based PCs support dual channeling. Unlike the AMDs, the memory controller is located on the motherboard, in the North Bridge. The new NForce chipset for Intel motherboards is interesting; for more information, check out the review provided by DMOS here. The current plans are for the memory controller to be off of the North Bridge and located in its own chip. They claim that the current nForce boards that run on AMD don’t need to have a memory controller on the motherboard. This chipset isn’t currently available so nothing is set in stone. The only non-dual channel chipsets are for the mobile market. The current 400mhz FSB Pentium Mobiles do not support dual channel. The next version, however, which is going to hit the market soon, will.
Now that we have done a quick run down of what is and is not supported, let's talk about what dual channeling really is. Dual channel memory doubles the pipelines available to the memory controller. This allows more information to be recalled from the memory faster.
dbramlet
2.2K Posts
0
November 3rd, 2006 03:00
dbramlet
2.2K Posts
0
November 3rd, 2006 03:00
dbramlet
2.2K Posts
0
November 3rd, 2006 04:00
All a "Dual Channel Memory Kit" is, is 2 sticks of matching RAM, that has been guaranteed to run in a dual channel configuration. This is a ploy by the manufacturers to try and cut down on the amount of technical support they have to provide, because Joe User already has some memory, and hears about Dual Channel offering a performance boost, goes out and buys more memory (slightly different speed or latencies) and his machine does not work stably with it.
Therefore, buying a dual channel memory kit is probably not worth the extra cash to most experienced users, as aslong as you buy 2 sticks of branded memory (e.g. Crucial, OCZ, Kingston, Corsair, Geil etc.) at the same time from the same supplier, they are likely to be identical and work fine, and you will have saved yourself around $60.
rickmktg
2 Intern
•
11.9K Posts
0
November 4th, 2006 23:00
dbramlet
2.2K Posts
0
November 4th, 2006 23:00
rickmktg
2 Intern
•
11.9K Posts
0
November 4th, 2006 23:00
rickmktg
2 Intern
•
11.9K Posts
0
November 4th, 2006 23:00
Vbo1
5 Posts
0
January 20th, 2007 00:00
rickmktg
2 Intern
•
11.9K Posts
0
January 21st, 2007 18:00
Vbo1
5 Posts
0
January 22nd, 2007 02:00