Unsolved
This post is more than 5 years old
2 Posts
0
1823
January 31st, 2020 12:00
Problem installing SK hynix SSD in Latitude E5530
I cloned the HHD in the my Latitude E5530 (Windows 10 operating system) to a SK hynix Gold S31 500GB 3D NAND 2.5 inch SATA III using the migrating software SK hynix provided. I installed the SSD into the laptop. When I tried to boot up computer I get a blue screen error.
It appears to be showing up in the system information page of the BIOS. Are there settings in the BIOS that need to be changed for it to boot up?
Thanks
tjsstlmo
No Events found!
JOcean
11 Legend
•
12.6K Posts
•
69.5K Points
0
January 31st, 2020 16:00
Personally for cloning I prefer Macrium Reflect Free available here. The UI is much more user friendly. As for the error go to this page for more information. But my guess would be a corrupt or missing BCD.
tjsstlmo
2 Posts
0
February 1st, 2020 18:00
That is the cloning software that I used. Should I try running the clone software again?