Unsolved
This post is more than 5 years old
10 Posts
0
1794
March 6th, 2019 02:00
Win 10 October 2018 update 1809 failed
When installing the 1809 update to my Latitude E7450, BIOS A20, windows 10 Pro 1803 OS build 17134.590 , I get the message "The installation failed in the FIRST_BOOT phase with an error during SYSPREP operation" and error 0xC1900101 - 0x30018 . Device manager shows all components ok - no exclamation marks. Any suggestions?
No Events found!
JOcean
11 Legend
•
12.6K Posts
•
69.5K Points
0
March 6th, 2019 05:00
The following might help.
https://www.techieshelp.com/windows-10-upgrade-error-code-0xc1900101-0x30018/
MartynZA
10 Posts
0
March 7th, 2019 01:00
Unfortunately did not resolve the problem, though an interesting learning exercise. Solution was from August 2015 so not sure if current, though I also think it was more aimed at the problem of the update not even downloading, whereas my issue is it downloads 1809 but then at around 51% installation it fails "Windows could not configure one or more system components" and uninstalls back to 1803. In the meantime I have installed the last 1803 update, so now on OS build 17134.619 .
MartynZA
10 Posts
0
March 7th, 2019 05:00
I have tried updating from a USB flash drive with exactly the same problem.
I ran the troubleshooter for windows updates without any success.
The E7450 is on Dell's list of machines suitable for the 1809 update.
nyc10036
6 Operator
•
5.6K Posts
0
March 7th, 2019 16:00
Try running Windows 10 Update Troubleshooter
MartynZA
10 Posts
0
March 7th, 2019 21:00
I have moved this topic to the Software-Windows10 community board.
MartynZA
10 Posts
0
March 7th, 2019 21:00
kjk411
1 Message
0
March 14th, 2019 10:00
Did you ever get an answer to this? My October Bios is also is failing. I read somewhere to turn off Intel Virtualization, but that did not work either.