Unsolved

This post is more than 5 years old

4 Posts

371954

December 4th, 2014 00:00

Alienware Area 51 R2 RAM Upgrade

May i know the RAM Slot can support up to how many speed ?

26 Posts

December 5th, 2014 18:00

Not sure I understand your question... the most the configurator allows is 32GB Quad Channel DDR4 at 2133MHz total. Are you asking what is the maximum an individual RAM slot can handle?

And if your not, well, I'm curious.

1 Rookie

 • 

31 Posts

December 5th, 2014 22:00

Hello all,

32 GB is the maximum RAM that can be purchased at build time; I have read (can't verify this however), that the Area 51 mobo can handle 64 GB RAM, as 4 x 16 GB DDR DIMMS.

The problem is that 16 GB DDR4 DIMMS are expensive.

4 Posts

December 6th, 2014 03:00

yeap, as i was thinking to get the normal spec and then plan for future upgrade to performance RAM. 

but not sure wat was the RAM Speed (Mhz) that mobo can support. as i contacted dell  sales support they also not able to answer me. 

1 Rookie

 • 

47 Posts

December 11th, 2014 16:00

I am running a Crucial Ballistix 16GB DDR4 - 2400Mhz kit in my Area 51 R2. 

The motherboard will definately support faster speeds. Not sure how high though.


5852.IMG_2038.JPG

1 Rookie

 • 

5 Posts

May 8th, 2015 06:00

I'm curious. The 2 ram sticks I got with the computer(that I've replaced). What are they called? Brand name? I'm trying to find them on Amazon so I can sell them for more upgrades to my computer. Anyone know this information?

1 Message

September 5th, 2015 02:00

I just got a Crucial Ballistix Elite kit ddr4 with 2666mhz when XMP profile is active and it runs at 2400mhz on base settings. CANT seem to get the XMP to work as my bios fails when booting. CONFUSES me because I was previously running G skill ripjaws 4 ddr4 quad 3000mhz and it wasn't even compatible with the Area 51 however the XMP profile would allow boot and would run the ram slower than with base settings for some reason. CAN anyone confirm any XMP profile compatible kits that work with the Area 51 mobo?

January 23rd, 2016 20:00

Can anyone elaborate on there ram upgrades?  I am considering the corsair dominator platinum 32g 2666 kit.  What did you adjust to get it to work?  Thanks for your help.

9 Posts

February 13th, 2016 16:00

I just installed 4 of DDR$ 16GB 2133 RipJaws in same computer and will not boot up. Have tried same corsair but 2266. Same problem. Will not boot. Is there something I need to do inaddition to installing the sticks?

February 13th, 2016 23:00

Make sure you have updated your bios to version A03.

9 Posts

February 14th, 2016 00:00

I knew enough to check that and it is A03 Somewhere in the forums someone said something about resetting the bios. I believe this means removing the M/B battery and re-installing. I can not locate. Must be behind the two Titan Video cards. Can you confirm this. Thanks for the reply. I am a newbie in forums procedure.

1 Rookie

 • 

124 Posts

February 15th, 2016 18:00

Behind the second GPU. And yes removing battery is resetting it 

9 Posts

February 15th, 2016 19:00

Thanks. I do appreciate it.

9 Posts

February 15th, 2016 19:00

Yourslook like it is the same as mine, The M/B that is. Can you tell me the make and numberof the Motherboard. Thanks

3 Posts

April 4th, 2016 13:00

did you ever figure it out? im thinking about doing the same upgrade. what RAM did you end up going with

9 Posts

April 4th, 2016 17:00

I bought the ram two sets different speeds MHz. Neither worked. Computer would not even get as far as the BSOD. Just blackscreen. I returned tho Newegg one set and gave the other set to my computer store owner. Thanks for your reply. Found out later that MB would not upgrade.

Top