Unsolved
This post is more than 5 years old
1 Rookie
•
2 Posts
0
23631
March 25th, 2017 18:00
Opening the Area 51 case?
I just got a new Area 51 and I cannot get the case open. I pull up on the latch at the top but the sides will not come off. Is there some trick that I am missing. From looking at a youtube video, you should just be able to lift up on the latch and pull the side off. That is not happening, is there some other release that needs to be done first?
No Events found!
b0mbsquad
2 Posts
0
March 25th, 2017 21:00
Remove the screw in between the latches.
satcomrat
1 Rookie
•
2 Posts
0
March 26th, 2017 04:00
That did the trick! I figured it was something simple.
Thanks
Tesla1856
8 Wizard
•
17.1K Posts
0
March 26th, 2017 11:00
Aurora R5 and R6 also have a tiny black screw on the latch.
Apart from keeping curious people out, I think it's mainly to prevent latches from opening during shipping.
speedstep
9 Legend
•
47K Posts
0
March 27th, 2017 05:00
Take the screw out and then push the lever left then you should be able to open your case.