Unsolved
This post is more than 5 years old
1 Rookie
•
1 Message
0
11261
September 1st, 2007 20:00
Blinking Orange Light?
On the front of my dimension 3000 When i turn the power on all i get it a blinking orange light on the font of the tower. Nothing on the screen and its not booting up at all. Just a blinking Orange light. What doesn this mean and how do i fix it?
No Events found!


shesagordie
12 Elder
•
46K Posts
0
September 1st, 2007 22:00
Check the sequence of the diagnostic lights on the back panel of the case.
The blinking amber LED of the power switch, usually indicates the motherboard is not receiving all the correct voltages from the PSU, check all the cables by unplugging and reseating them, if this fails to correct the problem, then the power supply appears to have failed, try a different power supply or replace it.
The D-3000 has an open back panel, most standard generic stock ATX PSU's, with or without the on/off switch and either a 20-pin or 20 + 4-pin main motherboard connector, can be installed. You can buy the unit from a local computer store or from any online vendor,
Bev.
===================================================
Please don't send me questions about your system by DCF Messenger.
Post the issue in the appropriate Board, where they will be answered.
David Bailey
111 Posts
0
September 5th, 2007 11:00