Unsolved
This post is more than 5 years old
3 Posts
0
12856
May 21st, 2007 18:00
D4600 Power Supply
I have a D4600 running XP Pro. On boot up it gets to the Windows XP screen then suddenly goes black and the "No Signal..." error message appears. It will run in safe mode but when attempting to run IE keyboard and mouse freeze. I am assuming this is a PS problem. My question: Can I replace the 250w PS that came with the system with a 400w ps?
thanks in advance
No Events found!
shesagordie
12 Elder
•
46K Posts
0
May 21st, 2007 18:00
Yes, because the D-4600 has an open back, you can use most standard generic, ATX PSU's, with a 20-pin or 20 + 4-pin main motherboard connector and with or without the on/off switch.
Bev.
===================================================
Please don't send me questions about your system by DCF Messenger.
Post the issue in the appropriate Board, where they will be answered.
Jerrybarr
14 Posts
0
May 21st, 2007 18:00
shesagordie
12 Elder
•
46K Posts
0
May 21st, 2007 19:00
Pleased to have helped. :)
Bev.
===================================================
Please don't send me questions about your system by DCF Messenger.
Post the issue in the appropriate Board, where they will be answered.
LtSteve11
3 Posts
0
May 21st, 2007 19:00
shesagordie
12 Elder
•
46K Posts
0
May 21st, 2007 20:00
Thank's for the heads up, I'm happy to hear that the problem is resolved.
Bev.
===================================================
Please don't send me questions about your system by DCF Messenger.
Post the issue in the appropriate Board, where they will be answered.
LtSteve11
3 Posts
0
May 21st, 2007 20:00