Unsolved
This post is more than 5 years old
6 Posts
0
4247
April 11th, 2006 00:00
Dimension 2400 will not boot up
My Dell Dimension 2400 will not boot up. I think it got hit by lighting while I was on vacation. The fan runs but the Diagnostic lights are A is yellow, B is green, C is yellow and D is green. Also the green light on the motherboard is on and the light on the front panel is on and it is green. Can someone please help me to see if this thing is fried or is it repairable?
No Events found!
ceri sheeran
2 Intern
•
1.7K Posts
0
April 11th, 2006 09:00
Hi,
YGYG is not shown in this list
http://support.dell.com/support/edocs/systems/dim2400/en/sm_en/advtshoo.htm#1105412
The only thing close is the reverse, GYGY, are you certain you have the ABCD correct.
hth
Ceri
deano52
6 Posts
0
April 11th, 2006 10:00
deano52
6 Posts
0
April 11th, 2006 19:00
I found the diagram for my diagnostic lights at this link. It is indicating that it might be the graphics card. Can someone explain to me how to go about removing the graphic card in a Dell Dimension 2400?
shesagordie
12 Elder
•
46K Posts
0
April 11th, 2006 19:00
deano52
Unless you have added a PCI graphics card, the D-2400 has integrated graphics on the motherboard and cannot be removed.
The link you posted, is for the Dimension B110/1100 systems,
http://support.dell.com/support/edocs/systems/dim1100/en/SM/adtshoot.htm#wp1043338
Bev.
Message Edited by shesagordie on 04-11-200603:59 PM