Unsolved
This post is more than 5 years old
56 Posts
0
6354
February 2nd, 2004 22:00
GXa boot-up question
Hey all, quick question. On my Optiplex GXa in my sig, it has recently developed a problem when booting up. It flashes a 'plug and play' configuration error, and then has you choose F1 to continue or F2 to enter system set-up. I have changed any settings or added any hardware recently, so I'm stumped.
Thanks in advance!
Adam
No Events found!
speedstep
11 Legend
•
47K Posts
0
February 3rd, 2004 00:00
You need to find out what the IRQ or other conflict is.
adt1982
56 Posts
0
February 3rd, 2004 21:00
How do I do that?
Adam
speedstep
11 Legend
•
47K Posts
0
February 4th, 2004 19:00
The following list of possible error messages describes common causes and workarounds.
No ISA PnP cards detected
Cause: The manager did not detect an ISA PnP card in your system, either because no cards are physically present or a physically present card is not jumpered into ISA PnP mode.
Solution: Shut down your system, then ensure that the cards present are seated correctly and jumpered (if necessary) to support ISA PnP mode.