No Video Display

Question

Any help is appreciated. I have installed an ATI Radeon 9200 SE and ATI TV Wonder VE.
Something isn't working. I get the following error messages at start up when the system recognizes new hardware. Zero Display Service Error. ATIMMC.exe. No display service.
I've checked the device mgr and yellow high lighted is PCI Input Device, Video Controller VGA compatible Video Controller. I cannot find Video Display on the Device Mgr. I suspect that chipsets need to be downloaded, but don't know which ones. Can anyone throw me a life ring? Thanks very much.

se7en5ive2 · Answer

Instructions for installation of PCI video cards are at this link:

http://forums.us.dell.com/supportforums/board/message?board.id=dim_video&message.id=120719

Trouble shooting help is here:

http://support.dell.com/support/topics/global.aspx/support/kb/en/document?dn=HO1024347

7

ShadowEdge · Answer

Sounds like the drivers either need to be installed ot reinstalled. Did the cards come with any cd's?

Renie64 · Answer

Thanks to you all. Now the problem seems to be no sound. I've reloaded the Sound Blaster Live cd, and the system indicates its there , however no device on Dev Mgr. Any good ideas? Thanks a/n Arn

se7en5ive2 · Answer

You are going to need to post to the Audio Forum for that one. I would uninstall drivers, mt recycle bin, shut down, remove soundcard, unplug system from wall, push Start button to clear CMOS, plug cable back into wall,reboot to double check driver uninstall, shutdown, reinstall videocard, reboot and see if XP launches the "Found New Hardware" wizard. If it does close wizard, shut down antivirus and reinstall drivers from Creative CD as instructed in Creative installation Wizard.

That's about the best I can come up with; maybe someone in Audio has a different approach,

7

Message Edited by se7en5ive2 on 09-08-2005 07:44 PM

Locked Topics – Desktops General

No Video Display

Was this post helpful?