Unsolved

This post is more than 5 years old

3 Posts

3366

December 11th, 2013 07:00

No windows screen

when I turn on the computer I get this message on a black screen; 

X300 SE 128MB BIOS P/N 113-A33406-100 

and a blinking cursor below, any advice???

3 Posts

December 11th, 2013 08:00

I apologize for the missing info, first timer! It is a Dimension 4700 with the original version of Windows that was loaded at time of purchase. Where do I find the video card? Thank you for the help!

12 Elder

 • 

45.2K Posts

 • 

172.6K Points

December 11th, 2013 08:00

Always include the PC model and version of Windows in your posts, :emotion-5: Looks like a reference to an X300 video card. Power off and unplug, press/hold power button for ~15 sec. Open the case and reseat the video card in the slot. Then close the case and see if it boots now. Otherwise, you may have to replace the card, or switch to onboard video, if your PC model supports onboard video.

3 Posts

December 11th, 2013 09:00

It seems have worked but lost the keyboard, suggestion. Thank you again!

12 Elder

 • 

45.2K Posts

 • 

172.6K Points

December 11th, 2013 14:00

Did you reseat the video card? USB or PS/2 keyboard? Check the cables. If USB, try a different port on rear of PC. When was last time you replaced motherboard battery?
No Events found!

Top