Unsolved
This post is more than 5 years old
2 Posts
0
6492
September 17th, 2005 01:00
Advanced port replicator power supply
I have a inspiron 600m laptop that uses a pa12 power supply. When I hook up the power supply into the APR and plug in the laptop, I get a error that reads the power suppy is not supplying enough power to run the APR. I noticed that the APR states for use with pa10 power supply. The pa10 has 18 v. and 3.5 a. The pa12 has 19.5 v and 3.34 a. Is this the cause for the error? Seems to me that I would be getting more power from my pa12 than my pa10. I just want to know someones opinion before I go out and buy a pa10 power supply.
Tim
No Events found!


scottatah
2 Intern
•
658 Posts
0
September 17th, 2005 04:00
It's very possible that you may have gotten your ac adapters mixed up, so if they don't show the listed wattage on them, try swapping them around. If they don't work, i dunno if you can figure out the wattage from the ratings listed on the adapter (if it doesn't list wattage) i'm sure someone knows a forumla to do so.
rickmktg
2 Intern
•
11.9K Posts
0
September 17th, 2005 17:00
TimlmiT
2 Posts
0
September 18th, 2005 21:00
HMKrieps
713 Posts
0
September 18th, 2005 21:00
The PA-10 has 19.5V and 4.62A, whoch makes 90W. The 600m works with PA-12 and PA-10, but when using the APR, it requires the PA-10.