Unsolved
This post is more than 5 years old
2 Posts
0
13373
February 5th, 2006 06:00
Dell Lattitude C610 CPU settings keep changing???
I recently purchased a Dell Lattitude C610 from Ebay.
Here are the specs.
I paid for XP Pro to be installed at the local computer store. since it came with a pirated version. Anyway the Operating System is legal now.
It has a 40 gig hard drive,
768 RAM
1200 CPU
yada yada yada (smiles) :smileyhappy:.
The CPU registers differently from one restart to the next. Some times it will be at the 1.2Ghz it is supposed to be, at other times it reads 797 Mhz, and at other times like right now as I write this it says 526 Mhz. This is really wierd!!!:smileysad:
I am unable to make udjustments in Bios. When I get to the page that shows the CPU settings the only thing I can change is the clock, and calendar on that page.
Has anyone seen a problem like this?
What is causing this fluctuation, and what can I do to make it stay at 1.2 Ghz?
I am glad there are people out there that know more about things like this than I do, and that there are people nice enough to lend a hand. Thank you in advance for your time and energy to answer this post.:smileyhappy:
Kind Regards,
David
Message Edited by theloudcry on 02-05-2006 02:23 AM
Message Edited by theloudcry on 02-05-2006 02:25 AM
Message Edited by theloudcry on 02-05-2006 02:26 AM
No Events found!


puterfixer
53 Posts
0
February 5th, 2006 07:00
Ed C
2 Intern
•
3.2K Posts
0
February 5th, 2006 09:00
Kareem_Kamel
5 Posts
0
February 16th, 2006 14:00
Ed C
2 Intern
•
3.2K Posts
0
February 16th, 2006 16:00
Kareem_Kamel
5 Posts
0
February 16th, 2006 18:00
puterfixer
53 Posts
0
February 16th, 2006 23:00
http://www.diefer.de/i8kfan/
There's a newer version coming out, i9kfangui, available here:
http://mckenziedev.com/fproducts.htm
Another more generic application to monitor and control a PC's fans, supporting Dell laptops among other motherboards, is SpeedFan:
http://www.almico.com/speedfan.php
With it, you can download a pre-defined profile for Dell Latitude C610 from the Support section:
http://www.almico.com/forummotherboards.php?man=257
Either of these solutions should make your laptop fans switch on faster and keep your processor cooler, hopefully without it going in protection mode at a lower speed. Also, make sure the laptop is on a flat surface, with a bit of venting space underneath (that's what the tall rubber feet are for), not on a soft cloth or on a bed.
Art
2 Intern
•
1.5K Posts
0
February 17th, 2006 02:00
(or use the aerosol canned 'air' sold for the purpose). Slightest amount of dust and lint drawn in by the
fans will greatly add to the heat problem.
One more utility from the same folks who started 'FanGUI' is SpeedswitchXP that gives you complete control
of CPU Speeds on WinXP and also includes the BEST Power Management Profile control.
http://www.diefer.de/speedswitchxp/index.html
Just click on the link above:)
Message Edited by Art on 02-16-2006 11:15 PM
Kareem_Kamel
5 Posts
0
February 18th, 2006 04:00
Ed C
2 Intern
•
3.2K Posts
0
February 18th, 2006 11:00
Ed C
2 Intern
•
3.2K Posts
0
February 18th, 2006 11:00
Kareem_Kamel
5 Posts
0
February 18th, 2006 11:00
when first installed these 2 softwares i mentioned b4 (i8fanugui and speedswitchXP) it was running good, even i can see the temp of the CPU goes to 85 (or more) celsius degree and the CPU is not slowing down to 600 MHz.
But later on the CPU is automatically changed, even at 75 degree now i upgraded to i9fangui software, I ll check it but it seems for me now that since the morning it is constant on 1.5 GHz but later on i ll do more processing on it (like Quake ;) )
I have one question, there is no way around to disable this automatic switching ? even i installed windows 2000 ?
thnx
Art
2 Intern
•
1.5K Posts
0
February 18th, 2006 14:00
and then same BenchMark with it set on Dynamic Switching.
i9FanGui will give you the option to force your fans to Maximum Speed, make
sure airflow is not blocked and clean out the 'dust-bunnies'.
puterfixer
53 Posts
0
February 19th, 2006 14:00
Kareem_Kamel
5 Posts
0
February 20th, 2006 03:00