Unsolved
This post is more than 5 years old
2 Posts
0
15538
May 1st, 2005 16:00
Enter and navigate BIOS
Greetings
Spent last two hours on Dell pages figuring out how to disable internal touch pad on Inspiron 5150 when PS/2 Mouse connected. Found procedure in Tech FAQs... refered me to System Users Guide to find out how to enter and Navigate BIOS to make change...only thing I could find in Systme Users Guide was to press F2 at power up...did that but no directions of how to navigate to get me to "pointing device" so I can make what appears to be a simple change...Pls Help.
No Events found!


NemesisDB
2 Intern
•
7.9K Posts
0
May 1st, 2005 18:00
leduke30
2 Intern
•
4K Posts
0
May 1st, 2005 19:00
I have never seen the BIOS pages on a 5100 series, but the C-series Laptops all had that option by setting PS/2 Mouse in Pointing Device on page 3 or 4 of BIOS setup. That disables the Touchpad if a PS/2 mouse is connected. Default is Touchpad/PS/2 Mouse and both work at all times. F2 will get you into Setup, but then read the directions on the bottom and right side of the pages
Latitude C840(converted from Inspiron 8200)
1.6mhz Pentium IV
512mb PC2100 DDR SDRAM
40gb Hitachi 7200rpm-HTE726040M9AT00-UDMA5
HL-DT-ST-GCC-4240N CDRW/DVDROM in Fixed Bay
LS-120 SuperFloppy in ModularBay
Windows XP Pro SP2
FanGui 2.20
nVidia GeForce2 Go 32mb Video Card
15" SXGA LCD
C/Dock II
Message Edited by leduke30 on 05-01-2005 03:11 PM
NemesisDB
2 Intern
•
7.9K Posts
0
May 1st, 2005 20:00
leduke30
2 Intern
•
4K Posts
0
May 1st, 2005 21:00
Message Edited by leduke30 on 05-01-2005 05:18 PM
Ford150
2 Posts
0
May 2nd, 2005 00:00
NemesisDB
2 Intern
•
7.9K Posts
0
May 2nd, 2005 01:00