Unsolved

This post is more than 5 years old

Closed

4 Posts

11066

September 24th, 2006 14:00

Latitude CPx Help:Battery

Hello,

Recenty after taking my CPx out of standby the battery stopped working. In the BIOS menu the batteyr is recognised but it doesnt charge. It remains at 0%. Anyone with any pointers?
Also a BIOS update is needed but it cant be done without a battery. IS there any override to allow a flash without a battery present?

Many Thanks,

ironclaw

24 Posts

October 8th, 2006 02:00

I have the same  computer.  I just bought a replacement battery but it does not charge.  It works with the AC adapter on but it doesn't charge with that either.  I know the problem is neither the computer nor the  adapter because when I put the old battery in, everything works just as it should.
 
What am I doing wrong or what should I be doing?

4 Posts

October 10th, 2006 17:00

I believe the problem is in the BIOS. Sadly, you cannot do a flash without a battery installed and charged. Unless someone can suggest an over ride.

Many thanks,

ironclaw

24 Posts

October 11th, 2006 00:00

What  if I put my old battery back in that is fully charged, and did the BIOS thing, would that work? Then put the new battery back in and tried charging it?
 
Thanks,
Dyana

4 Posts

October 11th, 2006 17:00

Yes,that should work. Provided that the battery can be charged. The new BIOS specifically seems to deal with this problem(and many problems releating to battery's). However the lastest BIOS release was 2002 (A14 revision).My CPx is a European Model from 2001.Bearing in mind this is all theory. But it should work. Failing that a new laptop is probably your best bet.If you do manage a BIOS update could you let me know how you get on?
 
Many Thanks,
 
ironclaw

24 Posts

October 12th, 2006 18:00

I did not have any success with the old battery and downloading the BIOS file.  I don't have a floppy drive so I wasn't able to have any luck! I may have to send my battery back and exchange it or something!

4 Posts

October 13th, 2006 16:00

It is possible to flash the BIOS from within Windows. Just download the specific Windows BIOS Flash proram to your desktop. Then run it. The computer will restart and flash the BIOS.
No Events found!

Top