Unsolved
This post is more than 5 years old
4 Posts
0
4139
February 23rd, 2006 06:00
Monitor color profile not loading after standby
I have calibrated my monitor with Gretag Macbeth Eye-One Match. The profile produced is set as the default profile. I have disabled Adobe gamma loader so that the Gretag loader is the only profile loader active.
Ater a full boot or restart the correct profile is loaded, but after standby it is not.
Any ideas how I can fix this?
Machine is 6000 with integrated graphics card (which may be the problem...no dedicated VRAM, although there is 2 gb RAM to be shared)
Thanks
Mike
Ater a full boot or restart the correct profile is loaded, but after standby it is not.
Any ideas how I can fix this?
Machine is 6000 with integrated graphics card (which may be the problem...no dedicated VRAM, although there is 2 gb RAM to be shared)
Thanks
Mike
No Events found!
bacillus
2 Intern
•
14.4K Posts
0
February 23rd, 2006 08:00
MikeBhm
4 Posts
0
February 23rd, 2006 11:00
I have got the latest driver for the Intel 915GM integrated card, but in searching for for it found the A09 BIOS update which mentions the Intel card. I've done the BIOS update but it hasn't fixed my problem.
The workaround for my problem is a little Gretag Macbeth app called "DisplayProfile" which enables quick switching between profiles. So I just have to run this after a standby to load the correct profile.
Mike