Unsolved
This post is more than 5 years old
2 Posts
0
24988
September 15th, 2012 10:00
Problem with Dell Studio 1555 screen
Hi,
Having a problem with my Dell Studio 1555 laptop. The screen is blank on startup. If I connect to another monitor I can see the startup and desktop ok.
Ran diagnostics and get the following error codes:
0414 - Inverter cable not detected
0321 - LCD EDID unable to access EDID EPROM.
Any advice gratefully received.
Thanks,
Neety
No Events found!
neety
2 Posts
0
September 17th, 2012 08:00
Essentially I'd like to know if the screen is salvageable or whether I will need to replace it? The inverter cable is being diagnosed as non-detected, hence I am hoping I can just replace this and the screen will function again. Although it was starting up with 6 or 8 beeps (I cannot recall), I cannot get it to reproduce - even when disconnected from the external monitor. Can anyone advise? thanks,
MicroTest
3 Apprentice
•
934 Posts
0
September 17th, 2012 10:00
If your system is still under warranty call Tech support if not =>
try reseating cables that connect the screen to the mainboard - "scary" stuff depending on your skills....
watch scenes at 4:06 and 4:50
watch scene 3:06 which shows you the display cable connected to the mainboard