Unsolved
This post is more than 5 years old
5 Posts
0
6944
August 2nd, 2006 18:00
Video card???
Hi folks: Been trying to get an answer on this: My mother's case reads "Dimension B110' however the service tab says she has a inspirion 9300.
What the problem is;, is that I moved her back to Win2k, and cannot get the right driver for her video card. I haven't been able to open the computer, the web invoice only reads 'Card (circut) graphics, 128m m22 9300' which if I am right, is a ATI Raedon x300. However, ATI's driver doesn't install, giving me an error that reads:
"setup was unable to find components that can be installed on your current hardware or software configuration. please make sure you have the reguired hardware or software."
So either I don't have some sort of element in Win2k it needs, or else this isn't an ATI driver. I have installed Win Installer 3, Direct X 9.0c, and SP4. I also tried the Omega drivers, but it just sits there, and the CPU usage reads '100%' even after 8 hours.
Can anyone help? I can't get any info from Dell, so I'm hoping that one of you may be able to get me on the right path. We're stuck with a 640x480x16c display, and is barely useable. I can't get back on XP, since it was a harddrive crash that hosed the entire HD.
Personally, she's like me. She rather be on Win2k, instead of putting up with MS.
But that's another post.
- Kevin
What the problem is;, is that I moved her back to Win2k, and cannot get the right driver for her video card. I haven't been able to open the computer, the web invoice only reads 'Card (circut) graphics, 128m m22 9300' which if I am right, is a ATI Raedon x300. However, ATI's driver doesn't install, giving me an error that reads:
"setup was unable to find components that can be installed on your current hardware or software configuration. please make sure you have the reguired hardware or software."
So either I don't have some sort of element in Win2k it needs, or else this isn't an ATI driver. I have installed Win Installer 3, Direct X 9.0c, and SP4. I also tried the Omega drivers, but it just sits there, and the CPU usage reads '100%' even after 8 hours.
Can anyone help? I can't get any info from Dell, so I'm hoping that one of you may be able to get me on the right path. We're stuck with a 640x480x16c display, and is barely useable. I can't get back on XP, since it was a harddrive crash that hosed the entire HD.
Personally, she's like me. She rather be on Win2k, instead of putting up with MS.
But that's another post.
- Kevin
No Events found!


B_Coppins
565 Posts
0
August 2nd, 2006 18:00
Laptop = Inspiron.
Desktop = Dimension.
By MS do you mean MICROSOFT?
Cause Win2k is MS( if you mean Microsoft )
Any Windows OS = Microsoft.
Message Edited by B_Coppins on 08-02-200603:25 PM
kcredden
5 Posts
0
August 2nd, 2006 19:00
Did some checking: Yes, the case reads 'Dimension B110' and it is a desktop unit. The service tag web page DOES read 'System type: Inspirion 9300' - See why there is so much confusion here?
Hmm...I was looking though the system tag page, and something caught my eye: "Assembly, Hinge, cover, plastic, 9300' that sounds indeed like a laptop.
So any idea what sort of video card I have? Or at least where I should be headed?
kcredden
5 Posts
0
August 2nd, 2006 19:00
B_Coppins
565 Posts
0
August 2nd, 2006 19:00
If you put in the Service Tag on Dell's site and it called it an Inspiron 9300 then it would be looking for MOBILE video drivers. As this is a desktop it doesnt need MOBILE drivers.
However if you havent tried that yet, I would do a Service Tag > Drivers
and if it comes up with MOBILITY drivers than you're going to need to go to ATI and get proper drivers.
Message Edited by B_Coppins on 08-02-200604:06 PM
kcredden
5 Posts
0
August 2nd, 2006 19:00
B_Coppins
565 Posts
0
August 2nd, 2006 19:00