1703 Flat Panel with UBS ports

Aftab Zaidi,

Thank you for using the Dell Community Forum.

The ports should be working. Here is some information on the monitors usb ports.

Universal Serial Bus (USB) Specific Problems

SPECIFIC SYMPTOMS	WHAT YOU EXPERIENCE	POSSIBLE SOLUTIONS
USB interface is not working	USB peripherals are not working	Check that your monitor is powered ON. Reconnect the upstream cable to your computer. Reconnect the USB peripherals (downstream connector).  Switch off and then turn on the monitor again.
High Speed USB 2.0 interface is slow.	High Speed USB 2.0 peripherals working slowly or not at all.	Check that your computer is USB 2.0 capable. Verify USB 2.0 source on your computer. Reconnect the upstream cable to your computer. Reconnect the USB peripherals (downstream connector).

---

Back to Contents Page

I have the same problem (USB Device Not Recognized, One of the USB devices attached to this computer has malfunctioned, and ...)

I tried all the items in the 1st troubleshooting suggestion (that is my problem exactly) to no avail. I have also ensured that the monitor driver was updated, so it's correctly reflecting the make/model vs plug 'n play.

HELP!