Unsolved
This post is more than 5 years old
4 Posts
0
10899
February 11th, 2007 23:00
2407 1:1 Pixel mapping
Hello, Late last year my home was burgled and my much loved 2405 went out the window. Insurance replaced the 2405 with 2407(A03 i believe) and I've been very happy with it until just recently. I attempted to run a game at a lower resolution but with 1:1 pixel mapping to avoid scaler artifacts. I used this feature a lot with the 2405 but since I've been playing WoW almost exclusively I can run it at native res perfectly well, however I cannot select 1:1 with the 2407. Googling the problem suggests that 1:1 mapping is buggy on the 2407 and that the later revision fixes this problem. Is there a work around for this? Is possible to update my firmware (if that is the only relevant change in the A04)? Thanks you.
No Events found!


DrunkenDonkey
16 Posts
0
February 12th, 2007 14:00
Cephal
4 Posts
0
February 12th, 2007 20:00
Cephal
4 Posts
0
February 12th, 2007 22:00
1:1 becomes selectable but as soon as you change resolution the menu disappears.
Alternatively, selecting 1:1 then changing the resolution flips the monitor back
into scaling mode.
Any more advice? :)
Shah__
1 Message
0
February 13th, 2007 06:00
On the A04 the aspect settings are finally selectable and it remembers the settings, Yay!
:D
Message Edited by Shah__ on 02-13-2007 02:03 AM
Cephal
4 Posts
0
February 14th, 2007 02:00
Schteevie
14 Posts
0
February 15th, 2007 16:00