This post is more than 5 years old
3 Posts
0
5237
August 2nd, 2011 07:00
Atari ST VGA issues
Bit of a strange request... I've got an Atari 1040ST with an adaptor cable to convert to running on VGA I'm using an E771a monitor, however the monitor hasn't synched so I believe I need to access the horizontal and vertical moire, but when accessed I can't alter the values. The correct settings should be 35.7 horizontal and 71.2 vertical. I've been led to believe that it should be possible to run the old Atari through a modern monitor. Has anyone got any ideas?
No Events found!
progmanhuge
3 Posts
1
August 2nd, 2011 11:00
Resolved the problem - please do not answer to this thread, thankyou
DELL-Chris M
Community Manager
•
56.9K Posts
•
232.1K Points
0
August 3rd, 2011 08:00
What was the fix?
progmanhuge
3 Posts
0
August 3rd, 2011 09:00
The 13 pin ST/VGA adapter cable was inserted into the Atari ST upside down, apparently it is a common error as the recess on the plug for some reason is turned at 180 degrees. I have mentioned it to the supplier. All working well now.