Unsolved

This post is more than 5 years old

13 Posts

12750

August 16th, 2006 14:00

Fairly happy with 2007WFP...

I just got a 2007WFP with an E510 system purchase. Overall, I'm happy with the monitor. It's version A02 and has a manufacture date of June 2006. I'm using the DVI connection. There aren't any yellow areas. No dead pixels. No banding. Also, there don't seem to be any backlight problems. Maybe I got lucky! However, I do have a few problems/concerns/comments:

-First problem is with Dell: I got the main computer and extras super quick. But the monitor hadn't arrived after awhile, so I contacted Dell. Turns out the 2007WFP was either lost in shipping or never shipped at all...I never was fully clear. I had the main system for 2 weeks before I got the monitor.

-There is a reddish cast around some letters (usually small font size). This is my first LCD display and I'm guessing this is due to the design?

-Reading text was straining my eyes, then I found out about ClearType. That has helped a lot, but I still have the reddish issue.

-The monitor is really bright. I turn the brightness setting down to about 10 when surfing the web and that seems to help...especially on sites with white backgrounds like this one.

-This monitor is replacing an old P780 CRT monitor. Overall, I think CRT provides a better picture. I viewed DVDs with the P780 and it just has a lot cleaner image. Further, text is displayed perfectly on the P780. I don't think this is the fault of the 2007WFP, but rather with LCD technology as a whole. I think I just prefer CRT. But I'm trying to move forward with the technologies since it's getting hard to find larger CRT monitors.

Just wanted to give some thoughts on my new monitor. Like I said, overall I'm happy!

Message Edited by Chad T on 08-16-200605:24 PM

642 Posts

August 20th, 2006 04:00

Download 'Nokia Monitor Test' from http://www.majorgeeks.com/download960.html and use it. Sounds like a convergence problem. This means that the red, green, blue lcd s don't overlap precisely.
My 244t at 1960x1200 i can read any text (that does not need a microscope) clearly and without color smears - pure text in any colors - no smudging.

13 Posts

August 20th, 2006 19:00

Convergence on an LCD display? I thought that only applied to CRT displays. I downloaded that software and the convergence test pattern looks fine. But as I type this text there is some red ghosting around the letters??

642 Posts

August 20th, 2006 21:00

Well, sorry...Duh...

How about 'alignment' on the 'readability' test? Does it do it on all text all of the time? That is what I meant, that it could be a bad alignment of the pixels thus causing the shadow. Otherwise, software - graphics card & drivers. You may have mentioned it but have you enabled 'clear type' in your XP settings? You do run XP don't you?

To sum up - a quality monitor should not do this...

As for your comparisons with crt s vs lcd s, I have had sony (g versions) 17" 19" & 21" crt s which were very good but I prefer the lcd s due to geometry, color calibration, easier on my eyes etc.. Crt s have the advantage of not having problems changing resolutions versus 'native' res. on lcd s. I do alot of work with design & use adobe creative suite cs2 (as well as games) & I can not abide bad monitors.

Message Edited by KevinR100 on 08-20-200605:40 PM

2 Intern

 • 

429 Posts

August 20th, 2006 23:00

Have you installed the monitor drivers? I think they contain color profile information so maybe that'll help fix up the reddish thing.
 

13 Posts

August 22nd, 2006 04:00

My system has a factory installed ATI Radeon X600 256MB video card and I just updated to the most recent Catalyst Control Center and drivers. I haven't installed specific drivers for my monitor, but device manager indicates the corrrect monitor....and I assumed that Dell installed the monitor drivers while putting my computer together.

The red ghosting only appears around certain characters. It shows up in this window as I'm composing this post, however, the "Tip: Limit your subject line...." above doesn't have the red ghosting. Strange. It only seems to do it with certain fonts and sizes.

Yes, I am using Cleartype.

Any other thoughts?

13 Posts

August 25th, 2006 19:00

I think I may have figured this out....I think it is a ClearType issue. I played around with different ClearType settings and the red factor has been greatly reduced. Has anybody else experienced ClearType over emphasizing red?
No Events found!

Top